350-401 Exam Dumps - Try Best 350-401 Exam Questions from Training Expert PrepAwayPDF
Practice Examples and Dumps & Tips for 2022 Latest 350-401 Valid Tests Dumps
Cisco 350-401 Exam Topics:
| Section | Weight | Objectives |
|---|---|---|
| Security | 20% | 1.Configure and verify device access control
2.Configure and verify infrastructure security features
3.Describe REST API security
5.Describe the components of network security design
|
| Infrastructure | 30% | 1.Layer 2
2.Layer 3
3.Wireless
4.IP Services
|
| Automation | 15% | 1.Interpret basic Python components and scripts 2. Construct valid JSON encoded file 3. Describe the high-level principles and benefits of a data modeling language, such as YANG 4. Describe APIs for Cisco DNA Center and vManage 5. Interpret REST API response codes and results in payload using Cisco DNA Center and RESTCONF 6. Construct EEM applet to automate configuration, troubleshooting, or data collection 7. Compare agent vs. agentless orchestration tools, such as Chef, Puppet, Ansible, and SaltStack |
| Network Assurance | 10% | 1.Diagnose network problems using tools such as debugs, conditional debugs, trace route, ping, SNMP, and syslog 2.Configure and verify device monitoring using syslog for remote logging 3.Configure and verify NetFlow and Flexible NetFlow 4.Configure and verify SPAN/RSPAN/ERSPAN 5.Configure and verify IPSLA 6.Describe Cisco DNA Center workflows to apply network configuration, monitoring, and management 7.Configure and verify NETCONF and RESTCONF |
| Architecture | 15% | 1. Explain the different design principles used in an enterprise network
2.Analyze design principles of a WLAN deployment
3.Differentiate between on-premises and cloud infrastructure deployments
5.Explain the working principles of the Cisco SD-Access solution
6.Describe concepts of wired and wireless QoS
7. Differentiate hardware and software switching mechanisms
|
Why Choose Onpassitsure Cisco Managing Industrial Networks with Cisco Networking Technologies (IMINS) 350-401 Dump?
Effective Learning Managing Industrial Networks with Cisco Networking Technologies (IMINS) 350-401 certification is an essential part of the IT corporate world. Explanation of 350-401 real questions is very important in this regard. The IMINS 350-401 exam dumps are the most reliable source of knowledge in this field.
We guarantee your Cisco 350-401 Exam success with the help of our Managing Industrial Networks with Cisco Networking Technologies (IMINS) 350-401 exam dumps. Our 350-401 exam dumpsbase pdf tests will help you pass the Managing Industrial Networks with Cisco Networking Technologies (IMINS) Cisco 350-401 Exam through your first try. Our Managing Industrial Networks with Cisco Networking Technologies (IMINS) 350-401 PDF exam dumps have been updated regularly to make sure that it covers the latest 350-401 exam. Cisco 350-401 Dumps are the most reliable solution for your Managing Industrial Networks with Cisco Networking Technologies (IMINS) Cisco 350-401 Exam success. We offer you a money-back guarantee if you are not satisfied with our training. Our Managing Industrial Networks with Cisco Networking Technologies (IMINS) 350-401 PDF exam dumps can clear all your doubts about the Managing Industrial Networks with Cisco Networking Technologies (IMINS) Cisco 350-401 Exam. We have 24/7 online support for Managing Industrial Networks with Cisco Networking Technologies (IMINS) Cisco 350-401 Exam. We provide a fast download speed of Managing Industrial Networks with the Cisco Networking Technologies (IMINS) Cisco 350-401 Exam. Configuring Cisco IOS Network Devices (ICND) 200-101 Exam PDF is provided in the Managing Industrial Networks with Cisco Networking Technologies (IMINS) 350-401 PDF exam dumps.
NEW QUESTION 27
Which feature is supported by EIGRP but is not supported by OSPF?
- A. unequal-cost load balancing
- B. equal-cost load balancing
- C. route summarization
- D. route filtering
Answer: A
NEW QUESTION 28
Refer the exhibit.
Which router is the designated router on the segment 192.168.0.0/24?
- A. This segment has no designated router because it is a p2p network type.
- B. This segment has no designated router because it is a nonbroadcast network type.
- C. Router Chicago because it has a lower router ID
- D. Router NewYork because it has a higher router ID
Answer: A
NEW QUESTION 29
An engineer must protect their company against ransom ware attacks. Which solution allows the engineer to block the execution stage and prevent file encryption?
- A. Use Cisco AMP deployment with the Exploit Prevention engine enabled.
- B. Use Cisco Firepower with Intrusion Policy and snort rules blocking SMB exploitation.
- C. Use Cisco Firepower and block traffic to TOR networks.
- D. Use Cisco AMP deployment with the Malicious Activity Protection engineer enabled.
Answer: D
NEW QUESTION 30
Refer to the exhibit.
A network engineer must simplify the IPsec configuration by enabling IPsec over GRE using IPsec profiles. Which two configuration changes accomplish this? (Choose two).
- A. Create an IPsec profile, associate the transform-set, and apply the profile to the tunnel interface.
- B. Apply the crypto map to the tunnel interface and change the tunnel mode to tunnel mode ipsec ipv4.
- C. Remove all configuration related to crypto map from R1 and R2 and eliminate the ACL.
- D. Remove the crypto map and modify the ACL to allow traffic between 10.10.0.0/24 to 10.20.0.0/24.
- E. Create an IPsec profile, associate the transform-set ACL, and apply the profile to the tunnel interface.
Answer: A,C
NEW QUESTION 31
Refer to the exhibit.
SwitchC connects HR and Sales to the Core switch However, business needs require that no traffic from the Finance VLAN traverse this switch Which command meets this requirement?
A)
B)
C)
D)
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 32
The login method is configured on the VTY lines of a router with these parameters:
* The first method for authentication is TACACS
* If TACACS is unavailable, login is allowed without any provided credentials Which configuration accomplishes this task?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION 33
Which two operations are valid for RESTCONF? (Choose two.)
- A. PUSH
- B. ADD
- C. HEAD
- D. PULL
- E. REMOVE
- F. PATCH
Answer: C,F
NEW QUESTION 34
Which statement about Cisco EAP-FAST is true?
- A. It requires a client certificate.
- B. It does not require a RADIUS server certificate.
- C. It is an IETF standard.
- D. It operates in transparent mode.
Answer: B
Explanation:
The EAP-FAST protocol is a publicly accessible IEEE 802.1X EAP type that Cisco developed to support customers that cannot enforce a strong password policy and want to deploy an 802.1X EAP type that does not require digital certificates.
EAP-FAST is also designed for simplicity of deployment since it does not require a certificate on the wireless LAN client or on the RADIUS infrastructure yet incorporates a built-in provisioning mechanism.
NEW QUESTION 35
Drag the drop the description from the left onto the routing protocol they describe on the right.
Answer:
Explanation:
Explanation
NEW QUESTION 36
Which antenna type should be used for a site-to-site wireless connection?
- A. Omnidirectional
- B. dipole
- C. Yagi
- D. patch
Answer: C
NEW QUESTION 37
An engineer must configure interface GigabitEthernet0/0 for VRRP group 10. When the router has the highest priority in the group, it must assume the master role. Which command set must be added to the initial configuration to accomplish this task?
- A. vrrp group 10 ip 172.16.13 254.255.255.255.0
vrrp group 10 priority 120 - B. vrrp 10 ip 172.16.13.254
vrrp 10 preempt - C. standby 10 ip 172.16.13.254
standby 10 priority 120 - D. standby 10 ip 172.16.13.254 255.255.255.0
standby 10 preempt
Answer: B
Explanation:
Explanation
In fact, VRRP has the preemption enabled by default so we don't need the vrrp 10 preempt command. The default priority is 100 so we don't need to configure it either. But notice that the correct command to configure the virtual IP address for the group is vrrp 10 ip {ip-address} (not vrrp group 10 ip ...) and this command does not include a subnet mask.
NEW QUESTION 38
Refer to the exhibit. Which set of commands on router r R1 Allow deterministic translation of private hosts PC1, PC2, and PC3 to addresses in the public space?
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: D
NEW QUESTION 39
When reason could cause an OSPF neighborship to be in the EXSTART/EXCHANGE state?
- A. Mismatched OSPF network type
- B. Mismatched areas
- C. Mismatched MTU size
- D. Mismatched OSPF link costs
Answer: C
Explanation:
Explanation
When OSPF adjacency is formed, a router goes through several state changes before it becomes fully adjacent with its neighbor. The states are Down -> Attempt (optional) -> Init -> 2-Way -> Exstart -> Exchange -> Loading -> Full. Short descriptions about these states are listed below:
Down: no information (hellos) has been received from this neighbor.
Attempt: only valid for manually configured neighbors in an NBMA environment. In Attempt state, the router sends unicast hello packets every poll interval to the neighbor, from which hellos have not been received within the dead interval.
Init: specifies that the router has received a hello packet from its neighbor, but the receiving router's ID was not included in the hello packet
2-Way: indicates bi-directional communication has been established between two routers.
Exstart: Once the DR and BDR are elected, the actual process of exchanging link state information can start between the routers and their DR and BDR.
Exchange: OSPF routers exchange database descriptor (DBD) packets
Loading: In this state, the actual exchange of link state information occurs Full: routers are fully adjacent with each other (Reference: http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093f0e.s html) Neighbors Stuck in Exstart/Exchange State the problem occurs most frequently when attempting to run OSPF between a Cisco router and another vendor's router. The problem occurs when the maximum transmission unit (MTU) settings for neighboring router interfaces don't match. If the router with the higher MTU sends a packet larger that the MTU set on the neighboring router, the neighboring router ignores the packet.
NEW QUESTION 40
Refer to the exhibit.
Link1 is a copper connection and Link2 is a fiber connection. The fiber port must be the primary port for all forwarding. The output of the show spanning-tree command on SW2 shows that the fiber port is blocked by spanning tree. An engineer enters the spanning- tree port-priority 32 command on GO/1 on SW2, but the port remains blocked. Which command should be entered on the ports that are connected to Link2 to resolve the issue?
- A. Enter spanning-tree port-priority 32 on SW1.
- B. Enter spanning-tree port-priority 224 on SW1.
- C. Enter spanning-tree port-priority 64 on SW2.
- D. Enter spanning-tree port-priority 4 on SW2.
Answer: A
Explanation:
Explanation
SW1 needs to block one of its ports to SW2 to avoid a bridging loop between the two switches.
Unfortunately, it blocked the fiber port Link2. But how does SW2 select its blocked port? Well, the answer is based on the BPDUs it receives from SW1. answer 'Enter spanning-tree port-priority 32 on SW1' BPDU is superior than another if it has:
1. answer 'Enter spanning-tree port-priority 32 on SW1' lower Root Bridge ID
2. answer 'Enter spanning-tree port-priority 32 on SW1' lower path cost to the Root
3. answer 'Enter spanning-tree port-priority 32 on SW1' lower Sending Bridge ID
4. answer 'Enter spanning-tree port-priority 32 on SW1' lower Sending Port ID These four parameters are examined in order. In this specific case, all the BPDUs sent by SW1 have the same Root Bridge ID, the same path cost to the Root and the same Sending Bridge ID.
The only parameter left to select the best one is the Sending Port ID (Port ID = port priority + port index). And the port index of Gi0/0 is lower than the port index of Gi0/1 so Link 1 has been chosen as the primary link.
Therefore we must change the port priority to change the primary link. The lower numerical value of port priority, the higher priority that port has. In other words, we must change the port-priority on Gi0/1 of SW1 (not on Gi0/1 of SW2) to a lower value than that of Gi0/0.
NEW QUESTION 41
Drag and drop the LISP components on the left to the correct description on the right
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_lisp/configuration/xe-3s/irl-xe-3s-book/irloverview.h
NEW QUESTION 42
Drag and drop the snippets onto the blanks within the code to construct a script that configures BGP according to the topology. Not all options are used, and some options may be used twice.
Answer:
Explanation:
Explanation
Graphical user interface, text, application, email Description automatically generated
NEW QUESTION 43 
Refer to the exhibit. What is the effect of introducing the sampler feature into the Flexible NetFlow configuration on the router?
- A. The resolution of sampling data increases, but it requires more performance from the router.
- B. Every second IPv4 packet is forwarded to the collector for inspection.
- C. CPU and memory utilization are reduced when compared with what is required for full NetFlow.
- D. NetFlow updates to the collector are sent 50% less frequently.
Answer: C
NEW QUESTION 44 
Refer to the exhibit. A network engineer configures a GRE tunnel and enters the show Interface tunnel command. What does the output confirm about the configuration?
- A. The physical interface MTU is 1476 bytes.
- B. The keepalive value is modified from the default value.
- C. Interface tracking is configured.
- D. The tunnel mode is set to the default.
Answer: D
Explanation:
Explanation
From the Tunnel protocol/transport GRE/IP line, we can deduce this tunnel is using the default IPv4 Layer-3 tunnel mode. We can return to this default mode with the tunnel mode gre ip command.
NEW QUESTION 45
Which three methods does Cisco DNA Centre use to discover devices? (Choose three)
- A. NETCONF
- B. ping
- C. SNMP
- D. CDP
- E. a specified range of IP addresses
- F. LLDP
Answer: D,E,F
Explanation:
Explanation
NEW QUESTION 46
......
For more info about Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)
Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)
Latest 100% Passing Guarantee - Brilliant 350-401 Exam Questions PDF: https://www.prepawaypdf.com/Cisco/350-401-practice-exam-dumps.html
350-401 Certification – Valid Exam Dumps Questions Study Guide: https://drive.google.com/open?id=1rKhvrXz-WZlNx2lqE5THZSU7jS0VOUfP