Guaranteed Success in CCNP Data Center 300-610 Exam Dumps
Cisco 300-610 Daily Practice Exam New 2026 Updated 330 Questions
Cisco 300-610 exam, also known as Designing Cisco Data Center Infrastructure (DCID) exam, is a certification test that focuses on the design of data center infrastructure using Cisco technologies. 300-610 exam is part of the Cisco Certified Network Professional (CCNP) Data Center certification track and is intended for professionals who design and implement data center infrastructure using Cisco technologies.
NEW QUESTION # 120
Which authentication software natively runs within the CLI of Cisco NX-OS devices?
- A. Ansible
- B. Python
- C. Chef
- D. Puppet
Answer: D
NEW QUESTION # 121
An engineer must configure a new maintenance policy that will apply to multiple Cisco UCS domains The policy must be available for use by service profiles and service profile templates created and managed n either Cisco UCS Manager or Cisco UCS Central Changes to this policy must be allowed only in Cisco UCS Central Which policy type must the engineer select to accomplish these goals?
- A. local policy
- B. global policy
- C. hybrid policy
- D. central policy
Answer: B
NEW QUESTION # 122
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION # 123
A customer needs to deploy a three-tier network architecture that will consist of web, and other business- critical applications. The solution will include Cisco UCS 6324 Fabric interconnects managing B and C Series servers The Fabric interconnects will be connected to the cisco nexus 7706 series switch for network access.
A storage array will be directly connected to the UCS deployment. Which type must be used to meet these requirements?
- A. UCS Interconnect in Ethernet switching mode
UCS interconnect to Fibre Channel switching mode
Fabric Interconnect uplinked to the Nexus device using an LACP port-channel in passive mode - B. UCS Inter conned in Ethernet switching mode
UCS interconnect in Fibre Channel end-host mode
Fabric Interconnects uplinked to the Nexus device using an LACP port-channel in active mode - C. UCS Interconnect in Ethernet end-host mode
UCS Interconnect in Fibre Channel end-host mode
Fabric Interconnect uplinked to me Nexus device using an LACP port-channel in passive mode - D. UCS Interconnect in Ethernet end-host mode
UCS Interconnect in Fibre Channel switching mode
Fabric Interconnects uplinked to the Nexus device using an LACP port-channel in active mode
Answer: D
Explanation:
FC must be in switching mode for Direct Attached Storage.
NEW QUESTION # 124
An engineer is designing a disaster recovery solution. In the event of a node failure, the solution should either direct all of the traffic to another node, or load-balance the traffic across the remaining nodes. Which solution should be implemented in the design?
- A. warm standby
- B. active/passive
- C. active/active
- D. cold standby
Answer: C
NEW QUESTION # 125
A customer is deploying a SAN based on Cisco MDS 9000 Series Switches. Each Inter-Switch Link must carry multiple VSANs at the same time. The access switch must share the same domain ID as the director switch to reduce the number of domain IDs needed in the fabric Drag and drop the operational port types from the right onto the boxes on the left to create a topology that meets these requirements. Not all port types are used. Port types are used more than once.
Answer:
Explanation:
NEW QUESTION # 126
Refer to the exhibit.
Server 1 fails to connect to the storage array over the Storage Area Network (SAN) of the Cisco NDS 9000 Series Switch. The requirements are to redesign the storage network and keep these considerations in mind:
The traffic from each of the server must be redundant and isolated.
The design must tolerate hardware and software failures and upgrades of SAN fabric devices.
Which action must be taken to meet these requirements?
- A. Add an additional supervisor to the Fibre Channel switch to support nondisruptive upgrades.
- B. Place an additional Fibre Channel switch to create two physically independent storage fabrics.
- C. Enable NPV and F-Port-channel on ports that face Server 1 on the Fibre Channel switch to create redundant paths.
- D. Create a SAN port channel that faces the storage device to sustain a link failure.
Answer: C
NEW QUESTION # 127
Cisco FabricPath is implemented in a data center. You plan lo implement anycast HSRP. What is an advantage of anycast HSRP as compared HSRPv2?
- A. Up to six HSRP gateways can forward traffic simultaneously.
- B. An HSRP group can be secured by using MD5.
- C. HSRP gateways use BFD for faster failure detection
- D. Up to four HSRP gateways can forward traffic simultaneously.
Answer: D
NEW QUESTION # 128
A network engineer must design a high-performance, lossless Ethernet network to support AI workloads in a data center. The network uses a spine-leaf topology with Cisco Nexus 9000 Series Switches. The design must ensure that critical AI traffic can move seamlessly across the fabric without being dropped due to congestion. The design requirements are:
Prevent packet drops for high-priority AI traffic flows.
Proactively manage and signal congestion to ensure continuous data flow even under heavy load.
Which design approach must be used to meet these requirements?
- A. Implement PFC only on high-priority traffic. Configure ECN across both spine and leaf switches.
- B. Use ECN across the network to manage congestion. Adjust the TCP settings for AI workload resilience.
- C. Configure PFC on all traffic classes across the spine-leaf topology. Enable ECN only on the leaf switches.
- D. Enable PFC across all QoS classes. Tune buffer at the spine layer for AI traffic congestion.
Answer: A
NEW QUESTION # 129
Refer to the exhibit.
Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?
- A. Primary
- B. Updating
- C. Initial
- D. Secondary
Answer: C
NEW QUESTION # 130
Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?
- A. GPU support
- B. processor count
- C. storage capacity
- D. network speed
Answer: A
Explanation:
https://www.cisco.com/c/dam/en/us/products/collateral/hyperconverged-infrastructure/hyperflex-hx-series/whitepaper-c11-740243.pdf
https://www.cisco.com/c/dam/en/us/products/collateral/hyperconverged-infrastructure/hyperflex-hx-series/hx-220c-m5-specsheet.pdf
NEW QUESTION # 131
An engineer configured the OSPF protocol in the vPC topology. During the catastrophic failure of one of the vPC member switches, the traffic was routed to a black hole. This route was caused by the long convergence time caused by the delay of the vPC member switch reboot. After the failure, the engineer rebooted both switches, but the secondary switch powered on before the primary one. It caused all the vPCs to be shut down due to consistency-check violations.
Which two features must be used to prevent these situations from happening in the future? (Choose two.)
- A. peer-gateway
- B. ip arp synchronize
- C. system priority
- D. delay restore
- E. auto-recovery
Answer: D,E
NEW QUESTION # 132
Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?
- A. processor count
- B. network speed
- C. GPU support
- D. storage capacity
Answer: D
Explanation:
Section: Storage Network Design
NEW QUESTION # 133
Refer to the exhibit.
A cloud provider service provider deployed three geographically separated Cisco ACI data centers. One of the customers needs to host a clustered application that is spread across the three data centers. The cluster nodes that host the application need a layer 2 topology to communicate with each other. Which Cisco ACI topology design meets these requirements?
- A. Multi-site
- B. Multi-pod over MP-BGP EVPN
- C. Multi-cloud
- D. Multi-pod over OSPF EVPN
Answer: A
Explanation:
Each data center has its own APIC cluster. This is multi-site setup.
NEW QUESTION # 134
Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?
- A. MCP
- B. UDLD
- C. BFD
- D. LLDP
Answer: B
Explanation:
UDLD is Uni-directional Link Detection protocol that is used to detect if there is a problem with rx/tx in the fiber strands that may cause switching loop.
NEW QUESTION # 135
......
Test Engine to Practice 300-610 Test Questions: https://www.prepawaypdf.com/Cisco/300-610-practice-exam-dumps.html
Use Valid 300-610 Exam - Actual Exam Question & Answer: https://drive.google.com/open?id=1vXYK1LpNZdwr6vHtIvrmZF3sRH3jQBCC