Get Prepared for Your 300-610 Exam With Actual 206 Questions
Valid 300-610 Test Answers Full-length Practice Certification Exams
NEW QUESTION # 32
Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?
- A. NPIV mode
- B. FC end-host mode
- C. NPV mode
- D. FC switching mode
Answer: D
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/ Storage-Mgmt/3-1/b_UCSM_GUI_Storage_Management_Guide_3_1/ b_UCSM_GUI_Storage_Management_Guide_3_1_chapter_01110.html
NEW QUESTION # 33
Drag the requirements from the left onto the correct policy types on the right.
Answer:
Explanation:
NEW QUESTION # 34
When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?
- A. inline load-balancing device
- B. ITD
- C. Layer 4 to Layer 7 device package
- D. BGP ECMP
Answer: C
Explanation:
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/ b_ACI_Best_Practices/b_ACI_Best_Practices_chapter_0110.html
NEW QUESTION # 35
An engineer is implementing a Cisco UCS environment. The system must aggregate all vNICs into a single policy and consistently enforce node disassociation across the cluster. Which two UCS policies meet these requirements? (Choose two.)
- A. LAN connectivity policy
- B. boot policy
- C. firmware policy
- D. scrub policy
- E. vNIC policy
Answer: A,E
NEW QUESTION # 36
Refer to the exhibit.
What must be the default gateway of the servers in EPG Web?
- A. subnet address of BD2
- B. subnet address of L3Out
- C. subnet address of BD1
- D. NAT appliance
Answer: D
NEW QUESTION # 37
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION # 38
An engineer is designing a Multichassis EtherChannel topology in which two switches must appear as a single device to a third downstream switch? Which two technologies meet this requirement? (Choose two.)
- A. FEX
- B. HSRP
- C. VSS
- D. 802.1q
- E. vPC
Answer: C,E
Explanation:
Section: Compute Design
Explanation/Reference:
Reference: https://www.cisco.com/c/dam/en/us/products/collateral/switches/nexus-7000-series-switches/C07-
572835-00_NX-OS_vPC_DG.pdf
NEW QUESTION # 39
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION # 40
Refer to the exhibit.
A cloud provider service provider deployed three geographically separated Cisco ACI data centers. One of the customers needs to host a clustered application that is spread across the three data centers. The cluster nodes that host the application need a layer 2 topology to communicate with each other. Which Cisco ACI topology design meets these requirements?
- A. Multi-pod over MP-BGP EVPN
- B. Multi-site
- C. Multi-pod over OSPF EVPN
- D. Multi-cloud
Answer: B
Explanation:
Each data center has its own APIC cluster. This is multi-site setup.
NEW QUESTION # 41
A company has several data centers with hundreds of Cisco UCS blade chassis. A network consultant plans to active Cisco Discovery Protocol to the servers to facilitate Layer 1 troubleshooting. For security reasons, the company wants to restrict the servers from sending different MAC addresses to the fabric interconnect after the MAC address from the first packet is learned. Which two policies be modified to support this design? (Choose two.)
- A. vNIC Template Policy
- B. Network Control Policy
- C. Ethernet Adapter
- D. Pin Group Policy
- E. vNIC Policy
Answer: A,B
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Network-Mgmt/4-0/b_UCSM_Network_Mgmt_Guide_4_0/b_UCSM_Network_Mgmt_Guide_4_0_chapter_01010.html
https://jeremywaldrop.wordpress.com/2010/05/03/how-to-enable-cdp-on-cisco-ucs-vnics/
NEW QUESTION # 42
A client in a commercial building Installs a Cisco blade server in the multitenant Cisco UCS blade Infrastructure. To cut operating costs me client's data center is shared with other organizations. The client asks an engineer prevent third parties from accessing their equipment and from accessing BlOS-related information when booting a server. Which Two policies must be used to meet these requirements? (Choose two.)
- A. CDN control
- B. front panel lockout
- C. post error pause
- D. ASPM support
- E. quiet boot
Answer: A,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Server-Mgmt/3-2/b_Cisco_UCS_Manager_Server_Mgmt_Guide_3_2/b_Cisco_UCS_Manager_Server_Mgmt_Guide_3_2_chapter_01110.html
Quiet boot is what the BIOS displays during booting the server. If enabled, the BIOS displays the logo screen.
I believe that quiet boot and CDN control may have the customer name.
NEW QUESTION # 43
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION # 44
Drag and drop the configurations from the left onto the correct policies on the right.
Answer:
Explanation:
NEW QUESTION # 45
An engineer must logically partition two Cisco Nexus 7000 Series Switches into two environments called Test_39919596 and Production_59423879. The environments must use only F2-Series line cards and be limited to a maximum of 265 port-channels. Which Cisco Nexus feature must be used?
- A. vFC
- B. vPC
- C. VRF
- D. VDC
Answer: C
NEW QUESTION # 46
A company owns a large-scale compute infrastructure that consists of over 1000 servers and virtual machines. The operational complexity continues to grow with additional policies and servers added to the environment. An infrastructure engineer is looking for an automation tool to reduce the operational complexity of configuring complex infrastructure. Because of the strict security requirements, the tool must be agentless, use the secure shell for transport, and be extendable using existing Python modules. Which tool meets these requirements?
- A. Saltstack
- B. Ansible
- C. NSO
- D. Puppet
Answer: B
NEW QUESTION # 47
Drag the requirements from the left onto the correct policy types on the right.
Answer:
Explanation:
NEW QUESTION # 48
Which two configurations are available by using a service profile template in Cisco UCS Manager? (Choose two.)
- A. VXLAN membership
- B. target server
- C. ARP entries
- D. UUID assignment
- E. number of vHBAs
Answer: D,E
Explanation:
Section: Automation Design
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/2-2/ b_UCSM_CLI_Configuration_Guide_2_2/b_UCSM_CLI_Configuration_Guide_2_2_chapter_0100000.html
NEW QUESTION # 49
A customer needs to deploy a three-tier network architecture that will consist of web, app, and other businesscritical applications. The solution will include Cisco UCS 6324 Fabric Interconnects managing B and C series servers. The fabric interconnects will be connected to the Cisco Nexus 7706 Series Switch for network access.
A storage array will be directly connected to the UCS fabric interconnects.
Which UCS deployment type must be used to meet these requirements?
- A. UCS interconnect in Ethernet switching mode
UCS interconnect in Fibre Channel end-host mode
Fabric Interconnects uplinked to the Nexus device using an LACP port-channel in active mode - B. UCS interconnect in Ethernet end-host mode
UCS interconnect in Fibre Channel end-host mode
Fabric Interconnects uplinked to the Nexus device using an LACP port-channel in passive mode - C. UCS interconnect in Ethernet switching mode
UCS interconnect in Fibre Channel switching mode
Fabric Interconnects uplinked to the Nexus device using an LACP port-channel in passive mode - D. UCS interconnect in Ethernet end-host mode
UCS interconnect in Fibre Channel switching mode
Fabric Interconnects uplinked to the Nexus device using an LACP port-channel in active mode
Answer: A
NEW QUESTION # 50
An engineer must design a multitenant solution using Cisco 7709 switches. The solution must support separate routing instances, separate spanning tree domains, and separate firewalls for each tenant.
Which solution meets these requirements?
- A. vPC
- B. VDC
- C. CFS
- D. VRF
Answer: B
Explanation:
Reference:
vmdcDesign22/VMDC_2-2_DG_2.htm
NEW QUESTION # 51
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Answer:
Explanation:
NEW QUESTION # 52
A data center uses Cisco Nexus 7000 Series Switch and contains two tenants, tenant A and tenant B.
* Tenant A uses IP addresses in the 10.2.30.41/24 to 10.2.30.64/24 range.
* Tenant B uses IP addresses in the 10.2.30.120/24 to 10.2.30.192/24 range.
The engineer must implement a solution that
* Isolates the traffic for each tenant as separate routing data and control planes.
* Physically partitions the Cisco Nexus device into separate multiple logical devices with separate management, failure domain isolation, and resource management.
Which two technologies meet these requirements? (Choose two.)
- A. vPC
- B. VRF
- C. VDC
- D. VLAN
- E. VXLAN
Answer: B,C
NEW QUESTION # 53
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Answer:
Explanation:
NEW QUESTION # 54
Refer to the exhibit.
An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
- A. end-host mode feature on the Cisco UCS Fabric Interconnects
- B. NPIV feature on the Cisco MDS Series
- C. Smart Zoning feature on the Cisco UCS Fabric Interconnects
- D. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
- E. NPV feature on the Cisco MDS Series.
Answer: B,E
Explanation:
Section: Compute Design
NEW QUESTION # 55
......
Accurate & Verified 2023 New 300-610 Answers As Experienced in the Actual Test!: https://www.prepawaypdf.com/Cisco/300-610-practice-exam-dumps.html
300-610 Certification Sample Questions certification Exam: https://drive.google.com/open?id=1pX7saG9UeMkYi4dkZ6lK5OUs7oY5zHzN