[Apr 19, 2024] CTAL_TM_001 Test Engine files, CTAL_TM_001 Dumps PDF
Latest ISQI CTAL_TM_001 PDF and Dumps (2024) Free Exam Questions Answers
CTAL-TM Certification Path
6 months of experience in Software development/software testing. Successful completion of the ISTQB Certified Tester Foundation level and a minimum of three years testing experience is recommended. The Intermediate Certificate may also be helpful but is not required.
How much CTAL-TM Exam cost
The price of the CTAL-TM exam is $199
How to book CTAL-TM Exams
In order to apply for the NET, You have to follow these steps
- Go to the CTAL-TM Official Site
- Read the instruction Carefully
- Follow the given steps
- Apply for the CTAL-TM
NEW QUESTION # 30
Model characteristics:
Which THREE of the below mentioned characteristics relate to TMMi? 1 credit
- A. Continuous model
- B. 20 key areas
- C. Is build around 12 critical testing processes
- D. Focussed on component and integration testing
- E. 5 maturity levels
- F. Staged model
- G. Focussed on higher level testing
- H. Highly related to CMMI
Answer: E,F,H
NEW QUESTION # 31
During test process improvement it is recommended to use standards where possible. Standards originate from various sources and they cover different subjects in relation to testing Pick TWO sources of software standards, useful to software testing from the ones mentioned below. 1 credit
- A. ISO 9126-1 'Software engineering- Product quality Part 1:
Quality model' is an international standard, that provides a basis on which to define quality
assurance solutions. - B. BS-7925-2 'Software testing. Software component testing is a national standard used
internationally. It covers a number of testing techniques that may be useful both on component
testing level and on system testing level. - C. ISA 4126-1 'Software engineering- Product quality Part 1:
Quality model' is an international standard, that provides a basis on which to define quality
assurance solutions. - D. IEEE 829 'standard for software test documentation' is an international standard to be following
mandatory by all testing origination regardless of lifecycle models. - E. SY-395-01 'Standard for East Coast Hospital software' is a regional standard adapted from a
national one. Besides hospital software, this standard ought to be used also by other types of
software system in the region.
Answer: A,B
NEW QUESTION # 32
The Test Manager must assemble team members that have which of the following characteristics? [1]
- A. Thrive in a routine, structured environment
- B. Will spark informal cross training among themselves
- C. Possess identical skill sets
- D. Will not change the severity of a defect report
Answer: B
Explanation:
A test manager must assemble team members that will spark informal cross training among themselves. This means that the team members are willing and able to share their knowledge, skills, and experiences with each other, and learn from each other's feedback and suggestions. This can improve the team's performance, productivity, and quality, as well as foster a collaborative and supportive culture. Cross training can also help the team members to develop new competencies, fill skill gaps, and handle different roles and tasks when needed. Top 10 Leadership Qualities to Distinguish a Test ManagerTest manager roles and responsibilities (with FAQs) References:
* Top 10 Leadership Qualities to Distinguish a Test Manager - Software Test Professionals
* Test manager roles and responsibilities (with FAQs) - Indeed
NEW QUESTION # 33
You have been promoted to Test Manager within your company. Your new manager states that your test team utilized a risk-based test approach for the last release but in production, a number of serious failures in lightly tested areas have occurred.
What would be your first action prior to the start of the next test phase for the next release? [3]
- A. Ensure you have the correct stakeholders' participation during the risk assessment process
- B. Review the test cases executed from the previous release.
- C. Request functional requirements be prioritized in order of importance to the stakeholder.
- D. Review the production defects and determine if they are valid.
Answer: A
Explanation:
The best action that the Test Manager can take prior to the start of the next test phase for the next release is to ensure that the correct stakeholders' participation during the risk assessment process. This is because the risk assessment process is crucial for identifying and prioritizing the risks that may affect the quality of the system, andallocating testing resources accordingly. The correct stakeholders are those who have the authority, knowledge, and interest in the system and its risks, and who can provide valuable input and feedback to the test team. By involving the correct stakeholders, the Test Manager can ensure that the risk-based test approach is aligned with the project objectives and the stakeholder expectations, and that the most critical areas are tested adequately. References: Certified Tester Advanced Level Test Manager (CTAL-TM) - ISTQB not-for-profit association, ISTQB Test Manager Certification - ISTQB Exams Worldwide - ISTQB Official Registration, Managing the Test Team - ISTQB not-for-profit association
NEW QUESTION # 34
What is a "depth-first" risk-based testing technique? [1]
- A. Non-functional test cases are executed first
- B. Highest risk test cases are executed first
- C. All risk items are tested at least once
- D. Lowest risk test cases are executed first
Answer: B
Explanation:
A depth-first risk-based testing technique is a method of prioritizing and executing test cases based on the risk level of the features or functions to be tested. In this technique, the test cases with the highest risk are executed first, followed by the test cases with lower risks. This ensures that the most critical and likely areas of failure are tested thoroughly and early in the testing process. Risk Based Testing: Approach, Matrix, Process & Examples - Guru99 References: Certified Tester Advanced Level Test Manager (CTAL-TM) - ISTQB not-for-profit association, ISTQB Test Manager Certification - ISTQB Exams Worldwide - ISTQB Official Registration, [Analytical Test Strategy: A Comprehensive Guide - LambdaTest]
NEW QUESTION # 35
In addition to introducing the new team member, you have decided to raise motivation. Which of the measures listed below would be the best measure to take in order to increase the motivation of the team? 2 credits
- A. Organize a meeting with senior management in which they address the importance of good testing for this project
- B. Introduce entry criteria to the testing phase
- C. Allow people to take some time off
- D. Provide more time for testing in the schedule
Answer: A
NEW QUESTION # 36
IEEE 1028 also defines "management review" as a type of review. What is the main purpose of a management review? 1 credit
- A. Align technical concepts during the design phase
- B. Provide independent evaluation of compliance to processes, regulations, standards etc.
- C. Establish a common understanding of requirements
- D. To monitor progress, assess the status of a project, and make decisions about future actions
Answer: D
NEW QUESTION # 37
Which of the following is a valid drawback of independent testing? 1 credit
- A. Developers loose the sense of responsibility and independent testers may become a bottleneck.
- B. Independent testers will become a bottleneck and introduce problems in incident management.
- C. Independent testers need extra education and always cost more.
- D. Developer and independent testing will overlap and waste resources.
Answer: A
NEW QUESTION # 38
Which of the following is a key characteristic of a management review? [1]
- A. Used to check consistency of and deviation from the system requirements
- B. Used to assess project risks
- C. Run by a moderator
- D. Conducted by an external group to assess process compliance
Answer: D
Explanation:
A management review, particularly in the context of software testing and quality assurance, often involves an external group or higher-level management team that reviews the processes and procedures to ensure compliance with specified standards or objectives. This can include assessing the effectiveness of current practices, identifying areas for improvement, and ensuring that the project aligns with organizational or industry standards. This type of review is distinct from other forms of reviews like technical reviews or walkthroughs, which might focus more on the technical aspects or consistency of system requirements.
NEW QUESTION # 39
You have written a defect report and have just been notified that it is in the "returned" state.
Who should take action on this defect? [1]
- A. The project manager who is responsible for the project
- B. The developer to whom the defect is assigned
- C. The tester who wrote the defect report
- D. The defect triage team
Answer: C
Explanation:
The person who should take action on this defect is the tester who wrote the defect report. This is because a defect report in the "returned" state means that the defect has been rejected or sent back to the tester for further clarification or investigation. The tester who wrote the defect report should review the feedback from the developer, the project manager, or the defect triage team, and take the appropriate action, such as providing more information, modifying the defect report, or closing the defect. Defect Reporting - ISTQB not-for-profit association References: Certified Tester Advanced Level Test Manager (CTAL-TM) - ISTQB not-for-profit association, ISTQB Test Manager Certification - ISTQB Exams Worldwide - ISTQB Official Registration, Defect Reporting - ISTQB not-for-profit association
NEW QUESTION # 40
Which testing metric identifies defect density? [1]
- A. Process
- B. Product
- C. Project
- D. People
Answer: B
Explanation:
Defect density is a testing metric that measures the number of defects identified in a component or system divided by the size of the component or system (expressed in standard measurement terms, e.g., lines-of-code, number of classes or function points)1. Defect density is a product metric, as it evaluates the quality or reliability of a software product2. Therefore, option B is the correct answer. Option A is incorrect because project metrics are metrics that measure the characteristics of the software project, such as cost, schedule, effort, scope, or resources3. Option C is incorrect because process metrics are metrics that measure the characteristics of the software process, such as effectiveness, efficiency, productivity, or maturity. Option D is incorrect because people metrics are metrics that measure the characteristics of the software personnel, such as skills, experience, motivation, or satisfaction. References: 1: Defect Density | ISTQB Glossary 2: Software Testing Metrics: What is, Types & Example 3: [Project Metrics - Software Testing Fundamentals] : [Process Metrics - Software Testing Fundamentals] : [People Metrics - Software Testing Fundamentals]
NEW QUESTION # 41
What would be a test approach regarding the test design techniques to be applied that would fit an item with the highest risk? 2 credits
- A. Component testing: decision testing; System testing: exploratory testing
- B. Component testing: decision testing; System testing: decision table testing
- C. Component testing: statement testing; System testing: equivalence partitioning
- D. Component testing: statement testing; System testing: decision table partitioning
Answer: B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 42
Within the projects, a master test plan and phase test plan will be used. Following is a list of characteristics applicable for test plans:
a.Any deviation from the procedures described in the test
b.strategy document
c.The overall estimated costs, timescales and resource
d.requirements
e.A detailed schedule of testing activities
f.The development deliverables to be tested
g.Which test staff members (names) will be involved and when
h.Level of requirements coverage achieved
Which TWO of the above mentioned characteristics relate to the phase test plan? 1 credit
- A. c
- B. e
- C. f
- D. a
- E. b
- F. d
Answer: A,B
Explanation:
Topic 10, Scenario 10, V3 "Online Application"
The cancellation of a current major development project has released resources. The development manager has decided to respond to his own request to tender and has proposed an in-house development with the use of a Rapid Application Development (RAO) approach.
NEW QUESTION # 43
Why might a RAD approach be a better option for the test manager rather than a sequential development? 2 credits
- A. It will extend the development team's abilities and enhance future delivery capabilities.
- B. It will allow the marketing, clerical and testing staff to validate and verify the early screen prototypes.
- C. Time-box constraints will guarantee code releases are delivered on schedule.
- D. More time can be spent on test execution as less formal documentation is required.
Answer: B
NEW QUESTION # 44
Since the system is in the medical domain and therefore in the safety critical area, testing needs to be rigorous and evidence is required that the system has been adequately tested. Identify THREE measures that would typically be part of the test approach in this domain and which are not always applicable in other domains! 1 credit
- A. Non-functional testing
- B. Reviews
- C. Traceability to requirements
- D. Test design techniques
- E. Failure Mode and Effect Analysis (FMEA) sessions
- F. Master test planning
- G. High level of documentation
Answer: C,E,G
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 45
The introduction of reviews and inspections has often failed as a process improvement action. Identify the THREE most important measures that should be taken to reduce the risk that this test process improvement will fail. 2 Credits (for 2 out of 3 correct 1 credit)
- A. Alignment with software process improvement
- B. Management support
- C. Process ownership and experienced moderators who drive the inspection process.
- D. Using a reference model, e.g. TMMi
- E. Training of those involved
- F. The availability of stands and processes
- G. Usage of a more traditional software development lifecycle
Answer: B,C,E
NEW QUESTION # 46
......
Pass Your ISQI Certifications CTAL_TM_001 Exam on Apr 19, 2024 with 67 Questions: https://www.prepawaypdf.com/ISQI/CTAL_TM_001-practice-exam-dumps.html
CTAL_TM_001 Free Exam Study Guide! (Updated 67 Questions): https://drive.google.com/open?id=13ShtrupUmA4O7ZGyFxr6fkex_OAFof6B