2023 Updated Huawei H35-460 Dumps PDF - Want To Pass H35-460 Fast
H35-460 Practice Exam Dumps - 99% Marks In Huawei Exam
NEW QUESTION # 36
If a CPE Pro device forgets its password, how long can I press the reset button on the near end to perform a factory reset?
- A. 8s
- B. 4s
- C. 20s
- D. 12s
Answer: A
NEW QUESTION # 37
The transmission DSCP value indicates the priority of the differential service code. The larger the value, the higher the priority.
- A. True
- B. False
Answer: A
NEW QUESTION # 38
Execute "route add 10.10.10.0 mask 255.255.255.0 192.168.5.1 -p" in the cmd window of the test computer, which one describes the error below?
- A. Commands are generally used in scenarios where the PC has many network cards
- B. You can use route print to confirm whether the command is executed successfully
- C. The data at destination address 10.10.10.X will be sent through the gateway 192.168.5.1
- D. This command adds a temporary route
Answer: D
NEW QUESTION # 39
gNodeB cell binding trace area ID Which is the MML command used?
- A. ADD NRCELL
- B. ADD NRLOCELL
- C. ADD NRLOCELL TRP
- D. ADD NRCELLOP
Answer: A
NEW QUESTION # 40
Regarding BWP, what is the following description correct?
- A. UE's initial BWP is obtained during cell search
- B. The CRB index is the RB prime index of the bandwidth within RG, while the PRB is the RB index within the BWP bandwidth
- C. The PRB index is the RB index of the bandwidth within the RG, while the CRB is the RB index within the bandwidth of the BWP
- D. Each UE can be configured with 8 dedicated BWPs
Answer: A,B
NEW QUESTION # 41
After the 5G network UE is powered on and enters the idle state, what operations will be performed in the Attach process? (Multiple Choice)
- A. Establish the same mobility context between the UE and the core network
- B. Listening network gets downlink synchronization
- C. Establish a default bearer between the UE and the core network
- D. Through the EPS ATTAH process, the UE can also obtain the IP address assigned by the network.
Answer: A,B,C,D
NEW QUESTION # 42
When verifying the uplink 5G Only offload effect of the NSA network, under normal circumstances, only the NR side has uplink traffic, and the rate is stable, while the LTE side tracks no rate
- A. Errors
- B. Correct
Answer: A
NEW QUESTION # 43
The gNodeB alarm level includes emergency alarms, important alarms, secondary alarms, and prompt alarms. The alarm level cannot be changed.
- A. True
- B. False
Answer: B
NEW QUESTION # 44
In order to obtain a high upstream rate, the transmit power of the CPE needs to be set to the maximum power of the generator
- A. Errors
- B. Correct
Answer: A
NEW QUESTION # 45
What is the application type used by the node remote maintenance channel detection?
- A. UDP
- B. TCP
- C. ARQ
- D. PING
Answer: D
NEW QUESTION # 46
In the NSA Networking Option 3 series scenario, gNodeB needs to configure the S1-C interface.
- A. True
- B. False
Answer: B
NEW QUESTION # 47
When the user interface of the S1 interface is configured, the port number of the local end and the peer end must be obtained.
- A. True
- B. False
Answer: B
NEW QUESTION # 48
Which command does gNodeB use to complete the configuration of S1 interface information?
- A. ADD S1
- B. ADD S1 INTERFACE
- C. ADD GNBS1
- D. ADD GNBCUS1
Answer: D
NEW QUESTION # 49
The gNodeB implements X2 self-configuration through the MME.
- A. True
- B. False
Answer: B
NEW QUESTION # 50
Regarding the description of NSA networking, which of the following is wrong?
- A. User data for gNBs can be sent directly to the EPC
- B. UE signaling can only be forwarded via eNB
- C. User data of gNB can be forwarded via eNB
- D. UE signaling can be sent directly to gNB
Answer: D
NEW QUESTION # 51
gNB QoS is to achieve hierarchical congestion management of services by mapping DSCP values.
- A. True
- B. False
Answer: A
NEW QUESTION # 52
Which functional modules of the BTS5900A base station are optional? (Multiple Choice)
- A. RF cabinet
- B. Battery cabinet
- C. Power cabinet
- D. Transmission cabinet
Answer: B,C,D
NEW QUESTION # 53
In version 5G RAN 2.0, how many 100MHz NR cells does AAU5613 support?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 54
When the gNodeB is planned to have multiple IP addresses and the next hop address is different, which of the following routing configurations is more suitable?
- A. Destination address routing configuration
- B. Direct routing configuration
- C. Source address routing configuration
Answer: A
NEW QUESTION # 55
Base station survey mainly includes two parts: base station site selection and detailed physical survey.
- A. Errors
- B. Correct
Answer: B
NEW QUESTION # 56
The transmitted data in the initial data configuration of gNodeB has a strong coupling relationship with the wireless data.
- A. True
- B. False
Answer: B
NEW QUESTION # 57
What are the RRUs that support FDD 1800M uplink and downlink decoupling?
- A. RRU3959
- B. RRU3971
- C. RRU3709
- D. RRU5901
Answer: A,B,D
NEW QUESTION # 58
Which of the passive WDM schemes for CRAN fronthaul is correctly described?
- A. No active device is required
- B. Have OAM capability
- C. No OAM capability
- D. Active fronthaul equipment required
Answer: C,D
NEW QUESTION # 59
Which of the following are required modules for gNodeB?
- A. IMB05
- B. UMPT
- C. UPEU
- D. UBBPfw1
Answer: B,C,D
NEW QUESTION # 60
......
Updated Verified H35-460 Q&As - Pass Guarantee: https://www.prepawaypdf.com/Huawei/H35-460-practice-exam-dumps.html
H35-460 Certification with Actual Questions: https://drive.google.com/open?id=1X9oYl4UgPiaXWWTkHXvo-0xWFYnSyGh9