2023 Latest OMS-435 dumps Exam Material with 85 Questions
Salesforce OMS-435 Questions and Answers Guarantee you Oass the Test Easily
Salesforce OMS-435 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 22
A developer creates a DataRaptor Extract to retrieve data to pass to an external service. The external service expects the field value to be integer. However, the DataRaptor is sending it as a string.
Which action can the developer take to fix this?
- A. In the DataRaptor Output tab, select the Output Data Type of that field to Integer.
- B. In the DataRaptor Output tab, enter the default value as 0 on the field.
- C. In the DataRaptor Extract tab, set the Input Data Type field to Integer.
- D. In the DataRaptor Formula tab, define a formula using the function TOINTEGER and use the formula as output.
Answer: A
NEW QUESTION 23
When launching an OmniScript from an action on a FlexCard, the OmniScript displays, but no Salesforce data is populated:
Which two errors could cause this behavior?
Choose 2 answers
Choose 2 answers
- A. The Id Field for Actions in the FlexCard is blank.
- B. There is no active version of the Data Raptor Extract.
- C. There is no active version of the OmniScript
- D. In the DataRaptor Extract Action, the Input Parameters Filter Value is misspelled.
Answer: A,D
NEW QUESTION 24
A developer is creating an OmniScript that provisions trail orgs to their customers. The following text block in the Omniscript uses a merge code to display the ID for the new trail org:
- A. To %%sDetails: Customer|0: ID%%
- B. To %sDetails: Customer|0: ID$
- C. To %Details: Customer|n: ID%
- D. To %Details: Customer|1: ID%
Answer: D
NEW QUESTION 25
A developer is building an OmniScript and needs to retrieve data from a single field in a Salesforce record.
Which OmniScript element does this?
- A. DataRaptor Post Action
- B. HTTP Action
- C. Select
- D. Lookup
Answer: A
NEW QUESTION 26
In an Integration Procedure, a developer needs to perform a multi-step calculation on every element of an array.
Based on best practices, what two methods are recommended?
Choose 2 answers
- A. Use a List Action to merge the array elements together.
- B. Use a Set Values Element inside a Loop Block.
- C. Use a Calculation Action to call a Calculation Procedure.
- D. Use a Matrix Action to call a Calculation Matrix.
Answer: C,D
NEW QUESTION 27
A developer is troubleshooting an Integration Procedure with two elements: A Remote Action named FetchCart and a Response Action named ResponseCart.
In Preview, what JSON node shows the data sent to the Response Action?
- A. FetchCart
- B. Response
- C. ResponseCart
- D. ResponseCartDebug
Answer: D
NEW QUESTION 28
Refer to the exhibit below. What is the marge code needed for this integration procedure structure to pass a CaseNumber node from the DRReadCase DataRaptor Extract Action to the HTTP Action's HTTP URL?
- A. MTTOPDetCaseDetail: CaseNumber%
- B. ((DRRCase, CaseNumber))
- C. ((CaseNumber))
- D. %DRReadCase: CaseNumber%
Answer: D
NEW QUESTION 29
An integration procedure contains a Remote Action element that calls a method of an APEX class. The method requires two fields are input: Accountid and ProductId. The integration Procedure data JSON contains the following nodes:
How should the Remote Action element be configured to pass the data correctly to the method?
- A. Set Return Only Additional Output to true, and add the following Key/Value pairs to additional input.
- B. Add the following to Send JSON Path: accountId: %Accountd% ProductId% Details Products%
- C. Check the DataRaptor Transform checkbox, and add the following Key/Value pairs to Output JSON Path:
- D. Check the Send Only Additional Input checkbox, and the following/ value pairs to Additional input:
Answer: A
NEW QUESTION 30
A developer has an existing DataRaptor Load that insert Contact records with inputs as LastName and firstName. The DataRaptor works as expected when previewed.
The developer creates an integration Procedure to test the DataRaptor and is using a SetValues element in the Integration Procedure to set the first name and last name for the contact record. The DataRaptor and Integration Procedure are set up as shown in the exhibit below.
When the developer executes the Integration procedure in preview, the following error message displays: Required fields are missing: [last Name]'', How should the developer address this issue?
- A. SetValuesContactDetails should have been added to Additional input of DataRaptor Post Action in Integration Procedure
- B. The valid field names should be added in the Domain object field in the DataRaptor
- C. The Set values Action Keys should include the DataRaptor Post Action element name path, e,g LoadContactDetails, lastname
- D. The DataRaptor Post Action in the integration procedure should have been executed before the Set Values Action
Answer: A
NEW QUESTION 31
What OmniStudio tool pre-populates the data m a PDF used by an OmniScript?
- A. A DataRaptor Transform
- B. A DataRaptor Load
- C. A SOQL Query
- D. A DataRaptor Extract
Answer: A
NEW QUESTION 32
Refer to the exhibit below. In this integration production structure, what Send JSON Path would be used to send the Output of the Action1 element to a Remote Action?
- A. Action1: BlockB. Block A
- B. Action1. BlockB. Block A
- C. BlockB: BlockB. Action1
- D. BlockA: BlockB. Action 1
Answer: A
NEW QUESTION 33
What is the reason for this? Refer to the exhibit below.
- A. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
- B. Both parent and embedded OmniScripts have the same element name for the Set Values element.
- C. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
- D. The flag passData.JSON in the parent OmniScript in not configured correctly.
Answer: A
NEW QUESTION 34
A customer sets up two LWC OmniScripts, one embedded into another. AccountId is set in a Set Values element in the parent OmniScript. The Accountid set in the parent OmniScript is used to set another Set values element ContextAccountId in the emvedded OmniScript. The embedded OmniScript is activated.
While previewing the OmniScript flow from the parent, it is found that Account I set correct in the parent OmniScript. However ContextAccount in the embedded OmniScript is not set with the Accountid from parent OmniScript. On previewing the embedded OmniScript individually. It is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.
- A. Both parent and embedded OmniScripts have the same element name for the Set Values element.
- B. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
- C. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
- D. The flag passData.JSON in the parent OmniScript in not configured correctly.
Answer: B
NEW QUESTION 35
A developer needs to create . DataRaptor to retrieve the name of an account for a contact.
Following best practices, how should a developer configure the extraction steps?
- A. Define an extraction step for the Account object, and set the Extract JSON Path to AccountContact.Name
- B. Define extraction steps for the Contact and the Account objects, and set the Extract JSON Path to Contact Account.Name
- C. Define an extraction step for the Contact object and set the Extract JSON Path to Contact Account.Name
- D. Define extraction steps for the Contact and the Account objects, and set the Extract 3SON Path to Account.Name
Answer: C
NEW QUESTION 36
A developer needs to configure a DataRaptor to retrieve data from a single object. The structure of the output data does not need to be changed.
Following best practices, which type of DataRaptor should the developer use?
- A. DataRaptor Transform
- B. DataRaptor Load
- C. DataRaptor Extract
- D. DataRaptor Turbo Extract
Answer: D
NEW QUESTION 37
An OmniScript updates data from one Salesforce record, but when it completes, only some of the data is updated in Salesforce. A DataRaptor Load saves the dat a. What error could cause this behavior?
Choose 2 answers
- A. The fields that are not updated are read only in Salesforce.
- B. In the DataRaptor Load, in the Preview tab, the Record is from the wrong record type.
- C. ContextId is misspelled in the merge code that passes the Recordld to the DataRaptor
- D. The input JSON paths In the DataRaptor Load do not match the JSON from the OmniScript.
Answer: A,D
NEW QUESTION 38
In an OmnoScript, a developer needs to configure a Disclosure element to require user input only if the user already checked a Non-Disclosure Agreement Checkbox.
How should the developer configure the conditional view to meet this requirement?
- A. Set element to optional if false
- B. Show element if true
- C. Set element to require if true
- D. Disable read only if true
Answer: D
NEW QUESTION 39
A developer needs to retrieve data from an external system that stores policy dat a. The external system supports REST APIs to access and update the policies. Due to the volume of the policy data and peak hours of business, calls to the REST APIs sometimes take longer than expected to respond.
The developer creates an Integration Procedure to retrieve the policy data for use in an OmniScript.
Given the external system's known performance issues, which two configurations should be used to implement the call to the external system?
Choose 2 answers
- A. Check the Chainable checkbox on the Integration Procedure Action in the OmniScript
- B. Check the Chain On Step checkbox on the HTTP Action in the Integration Procedure
- C. Set the Timeout property on the HTTP Action in the Integration Procedure
- D. Configure a Remote action with timeout settings of 120000
Answer: C,D
NEW QUESTION 40
A company wants to allow agents to send customers a quote for signature. The quote is a documents created using a DocuSign template that has been prefilled with all of the quote details. The document will be emailed to one or more recipients for signature.
How should a developer configure this functionality in an OmniScript?
- A. DocuSign Signature Action
- B. PDF Acwm
- C. Email Action
- D. DocuSign Envelope Action
Answer: A
NEW QUESTION 41
Refer to the exhibit.
What JSON code correct represent the step in the OmniScript Structure panel shown?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION 42
Refer to the exhibit below.
What is the reason that the fields fail to display the fetched data?
- A. FirstName, LastName, and BirthDate are not placed inside the Type Ahead Block.
- B. Lookup Mode is selected in the properties of the Type Ahead Block.
- C. Use Data JSON is Not selected in the properties of the Type Ahead Block.
- D. The typeHead key is not in the correct format.
Answer: A
NEW QUESTION 43
A developer is configuring the API URL in an HTTP Action element within an Integration procedure.
What is the merge code syntax for passing a Date node from an element named SetValues in the URL?
- A. {(SetValues. Date)}
- B. %SetValues Date
- C. x%SetValues.Date%
- D. (' Setvalues'] [ 'Date']
Answer: B
NEW QUESTION 44
......
Share Latest OMS-435 DUMP Questions and Answers: https://www.prepawaypdf.com/Salesforce/OMS-435-practice-exam-dumps.html
PDF Dumps 2023 Exam Questions with Practice Test: https://drive.google.com/open?id=1kExPK1Wpz56N9IVuwU-B9vCnszLnLCMt