Updated Oct-2023 Official licence for 1Y0-241 Certified by 1Y0-241 Dumps PDF
Grab latest Amazon 1Y0-241 Dumps as PDF Updated on 2023
Citrix 1Y0-241 exam covers a range of topics related to deploying and managing Citrix ADC 13 with Traffic Management. These topics include configuring advanced load balancing and GSLB, securing Citrix ADC, troubleshooting, and optimizing Citrix ADC performance. 1Y0-241 exam also covers topics related to managing and monitoring Citrix ADC using Citrix ADM. Candidates taking 1Y0-241 exam should have a good understanding of networking concepts and protocols, as well as experience working with Citrix ADC and related technologies.
NEW QUESTION # 61
A Citrix Administrator needs to match the host name 'www.example.com' in all HTTP requests.
Which expression, when used, meets this requirement?
- A. HTTP.REQ.HOSTNAME.EQ("www.example.com")
- B. HTTP.RES.HOSTNAME.CONTAINS("www.example.com")
- C. HTTP.REQ.HOSTNAME("example.com")
- D. HTTP.RES.HOSTNAME.EQ("www.example.com")
Answer: A
NEW QUESTION # 62
Scenario: A Citrix Administrator installed the compression feature on the web servers. To offload the compression on the Citrix ADC, the administrator configured the Citrix ADC appliance to remove the 'Accept Encoding' header from all HTTP client requests. However, the administrator observes that data is NOT being compressed by the Citrix ADC, even though the 'Accept Encoding' header is being removed from all requests.
What could be the cause of this issue?
- A. The compression policy needs to be reconfigured
- B. The rewrite policy is bound at an incorrect bind point
- C. The servers are automatically compressing all responses
- D. Servercmp is disabled on the Citrix ADC
Answer: A
NEW QUESTION # 63
Scenario: A Citrix Administrator configured a rewrite action as follows:
> add rewrite action sync_date replace http.res.date.sys.time
What is the correct way to interpret this rewrite action?
- A. It replaces the date header in the HTTP response with the Citrix ADC system time in a conventional date format.
- B. It replaces the Citrix ADC system time with the date header in a conventional date format.
- C. It is invalid, as system time CANNOT be referenced in the system policy.
- D. It replaces the date header in the HTTP response with the Greenwich Mean Time (GMT) time stamp.
Answer: D
NEW QUESTION # 64
In a global server load balancing (GSLB) active-active environment, the connection proxy is used as the site persistence method.
What is used to source the traffic when the connection is proxied?
- A. Virtual IP (VIP)
- B. LDNS IP Address
- C. Subnet IP (SNIP)
- D. Client source IP
Answer: D
NEW QUESTION # 65
Scenario: A company acquires three smaller companies which adds more than 1.500 employees to the organization. The current Citrix ADC appliance does NOT support adding that many users.
A Citrix Administrator needs to use a multi-tenant solution, giving each newly acquired company its own Citrix ADC for VPN access load balancing, and a minimum of 20 Gbps of throughput.
How can the administrator meet the needs of these newly acquired companies?
- A. Purchase a Citrix ADC CPX for each
- B. Purchase a Citrix ADC SDX appliance, and configure a Citrix ADC instance for each
- C. Install XenServer and configure a Citrix ADC VPX 3000 for each
- D. Purchase a Citrix ADC MPX appliance for each
Answer: B
NEW QUESTION # 66
Scenario: While performing a disaster recovery test, a Citrix Administrator decides to failover the Citrix ADC high availability (HA) pair appliances. The administrator notices that the failover is NOT working as expected, and the secondary Citrix ADC is NOT taking over as primary. The administrator suspects that networking issues may be causing the failure.
What could be the cause of this issue?
- A. HA monitoring is enabled on an interface of the secondary node that shows as ENABLED, DOWN.
- B. HA heartbeats are only seen on some enabled interfaces of the secondary node.
- C. HA monitoring is enabled on a disabled interface of the primary node.
- D. The Independent Network Configuration (INC) mode is enabled on the primary node.
Answer: A
Explanation:
Explanation
https://support.citrix.com/article/CTX109013/troubleshooting-netscaler-high-availability-ha-issues
NEW QUESTION # 67
Which two items must be true for a client to connect to an SSL offload vServer without any SSL errors? (Choose two.)
- A. The root certificate is installed on the Citrix ADC.
- B. The root certificate is installed on the client s device.
- C. The server certificate is from a private certificate authority (CA).
- D. The server certificate is bound to the load-balancing vServer.
Answer: A,B
NEW QUESTION # 68
Scenario: A Citrix Administrator configured a responder policy as follows:
> add responder action Redirect_Act respondwith "DIAMETER.NEW_REDIRECT(\"aaa://host.example.com\")"
> add responder policy Redirect_Pol "diameter.req.avp(264).value.eq(\"host1.example.net\")" Redirect_Act
> bind lb vServer vs1 -policyName Redirect_Pol -priority 10 -type REQUEST What will be the effect of this configuration?
- A. Response originated from "host.example.net" will be redirected to "host1.example.com".
- B. Response originated from "host1.example.net" will be redirected to "host.example.com".
- C. Request originated from "host1.example.net" will be redirected to "host.example.com".
- D. Request originated from "host.example.net" will be redirected to "host1.example.com".
Answer: C
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/appexpert/responder/diameter-support-responder.html
NEW QUESTION # 69
What is the first thing a Citrix Administrator should develop when creating a server certificate for Citrix ADC to secure traffic?
- A. A certificate revocation list (CRL)
- B. A private key
- C. A certificate key-pair
- D. A certificate signing request (CSR)
Answer: B
NEW QUESTION # 70
Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck at the Citrix ADC.
What can the administrator do to increase bandwidth on the Citrix ADC?
- A. Purchase another Citrix ADC MPX appliance.
- B. Add two more 10G Citrix ADC ports to the network and configure VLAN.
- C. Plug another 10G Citrix ADC port into the router.
- D. Add another 10G Citrix ADC port to the switch, and configure Link Aggregation Control Protocol (LACP).
Answer: D
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/networking/interfaces/configuring-link-aggregation.html
NEW QUESTION # 71
Which setting is responsible for reducing the server load, improving response time, and increasing the number of SSL transactions per second on an SSL vServer?
- A. SSLv2 redirect
- B. Session timeout
- C. SSLv3
- D. Session reuse
Answer: D
Explanation:
Explanation
answer: D. Session reuse
Short Explanation with reference:
Session reuse is a feature that allows the Citrix ADC appliance to reuse an existing SSL session between the client and the server, instead of creating a new one for each request1. This reduces the server load, improves response time, and increases the number of SSL transactions per second on an SSL vServer, as the session establishment process involves expensive cryptographic operations2. Session reuse is enabled by default on the Citrix ADC appliance, but it can be disabled or configured with different options1.
1: Configuring Session Reuse | NetScaler 2: Lightboard Lessons: SSL Transactions Per Second - DevCentral - F5, Inc.
NEW QUESTION # 72
Scenario: A Citrix Administrator downloaded and deployed Citrix Application Delivery Management (ADM) in an environment consisting of six Citrix ADCs and 100 virtual servers. When viewing the Citrix ADM console, the administrator sees only 30 virtual servers.
Why is the administrator unable to see all 100 virtual servers?
- A. Citrix ADM is using a free license.
- B. Additional Citrix ADM systems need to be deployed to see all virtual servers.
- C. The Citrix ADC and Citrix ADM firmware versions are NOT the same.
- D. The nsroot passwords are NOT the same across all the Citrix ADCs.
Answer: B
NEW QUESTION # 73
Scenario: A Citrix Administrator configured a responder policy as follows:
> add responder action Redirect_Act respondwith
"DIAMETER.NEW_REDIRECT(\"aaa://host.example.com\")"
> add responder policy Redirect_Pol "diameter.req.avp(264).value.eq(\"host1.example.net\")" Redirect_Act
> bind lb vServer vs1 -policyName Redirect_Pol -priority 10 -type REQUEST What will be the effect of this configuration?
- A. Response originated from "host.example.net" will be redirected to "host1.example.com".
- B. Response originated from "host1.example.net" will be redirected to "host.example.com".
- C. Request originated from "host1.example.net" will be redirected to "host.example.com".
- D. Request originated from "host.example.net" will be redirected to "host1.example.com".
Answer: C
Explanation:
Explanation
https://docs.citrix.com/en-us/citrix-adc/current-release/appexpert/responder/diameter-support-responder.html
NEW QUESTION # 74
A Citrix Administrator needs to confirm that all client certificates presented to the authentication vServer are valid until the year 2023.
Which expression can the administrator use to meet this requirement?
- A. CLIENT.SSL.CLIENT_CERT.DAYS_TO_EXPIRE.EQ(2023)
- B. CLIENT.SSL.CLIENT_CERT.VALID_NOT_BEFORE.EQ(GMT2023)
- C. CLIENT.SSL.ORIGIN_SERVER_CERT.VALID_NOT_AFTER.EQ(GMT2023)
- D. CLIENT.SSL.CLIENT_CERT.VALID_NOT_AFTER.EQ(GMT2023)
Answer: D
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/ssl/ssl-actions-and-policies/config-built-in- ssl-actions.html
NEW QUESTION # 75
Scenario: A Citrix Administrator needs to integrate LDAP for Citrix ADC system administration using current active directory (AD) groups. The administrator created the group on the Citrix ADC, exactly matching the group name in LDAP.
What can the administrator bind to specify the permission level and complete the LDAP configuration?
- A. An authentication, authorization, and auditing (AAA) action to the group
- B. A nested group to the new group
- C. A command policy to the group
- D. Users to the group on the Citrix ADC
Answer: C
NEW QUESTION # 76
Which profile can a Citrix Administrator create to configure a default profile that disables TLSv1?
- A. DTLS
- B. HTTP
- C. SSL
- D. TCP
Answer: C
NEW QUESTION # 77
Scenario: A Citrix ADC receives packets destined for a MAC address owned by the Citrix ADC. The destination IP address of the packets does NOT belong to the Citrix ADC. Layer 3 mode is enabled by default on the Citrix ADC.
The Citrix ADC will __________ the packets in this scenario. (Choose the correct option to complete the sentence.)
- A. route
- B. process
- C. drop
- D. bridge
Answer: A
NEW QUESTION # 78
......
Latest 1Y0-241 Exam Dumps Citrix Exam from Training: https://www.prepawaypdf.com/Citrix/1Y0-241-practice-exam-dumps.html
Newly Released 1Y0-241 Dumps for CCA-AppDS Certified: https://drive.google.com/open?id=1JqG_glFv3l76qTEB2kpuwgvaI1fs-q1W