100% Guaranteed Results NS0-173 Unlimited 62 Questions [2021]
NS0-173 Dumps PDF - Want To Pass NS0-173 Fast
Network Appliance NS0-173 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION 36
The storage administrator must change the vHBA settings bound to a template associated with a production server.
What happens when the settings are reconfigured in this scenario?
- A. The server that is associated with the service profile reboots.
- B. The vHBA template is deleted from UCS Manager.
- C. The vHBA configuration change does not affect LUN access.
- D. The service profile template that is associated with the server is initialized.
Answer: D
NEW QUESTION 37
A client has a FlexPod Datacenter solution with four active fabric links in port channel mode established between the Cisco Fabric Interconnects and the IOMs on a Cisco 5108 blade chassis. The blade chassis is fully populated with Cisco UCS B200M5 blades. A worker in the data center inadvertently unplugs the fourth uplink cable from IOM-A while working in the rack.
In this scenario, what happens to the network traffic?
- A. Traffic is load-balanced within IOM-B.
- B. Traffic is load-balanced within IOM-A.
- C. There is a loss of connectivity for servers 4 and 8.
- D. Connectivity for servers 3, 4, 7, and 8 all fail over to IOM-B.
Answer: D
NEW QUESTION 38
After you install a FlexPod infrastructure at a customer site, you need to migrate the existing Vmware virtual machines off the infrastructure that was used before FlexPod was installed.
Which VMware vSphere feature accomplishes this task?
- A. vSphere DRS
- B. VM Component Protection
- C. vSphere HA
- D. vMotion
Answer: D
NEW QUESTION 39
Which two NetApp storage controllers would be used in a valid FlexPod Datacenter configuration? (Choose two.)
- A. NetApp AFF A700
- B. NetApp EF570
- C. NetApp E2800
- D. NetApp FAS2700
Answer: A,D
NEW QUESTION 40
A customer recently configured its Cisco UCS, and within the Chassis Discovery policy, they set the link group preference to Port Channel.
Which two benefits would they derive from this link group preference? (Choose two.)
- A. All the links between the Cisco Fabric Interconnects and chassis IOM are pinned.
- B. All the links between the Cisco Fabric Interconnects and chassis IOM are shared.
- C. Traffic is load balanced across the links.
- D. Each blade has an assigned Cisco Fabric Interconnects link.
Answer: B,C
NEW QUESTION 41
A client has a requirement to set up a FlexPod Datacenter with the NetApp fabric MetroCluster architecture. You want to enable connectivity between the deployments.
In this design, which two components are required to accomplish this task? (Choose two.)
- A. Cisco Nexus 9000 switches
- B. Cisco Nexus 7000 switches
- C. Cisco Nexus 3000 switches
- D. Cisco MDS 9300 switches
Answer: A,B
NEW QUESTION 42
You are designing a FlexPod solution that requires 32 ports running at 40 Gbps.
To satisfy this requirement, which Cisco Fabric Interconnect should you deploy?
- A. 6296UP
- B. 6332-16UP
- C. 0
- D. 6248UP
Answer: C
Explanation:
FI 6332 is a one-rack-unit (1RU) 40 Gigabit Ethernet, and FCoE switch offering up to 2.56 Tbps throughput and up to 32 ports. The switch has 32 40Gbps fixed Ethernet.
NEW QUESTION 43
A service provider is designing a FlexPod configuration to host multiple customers in a hybrid cloud environment, where IP address-range conflicts might arise on the shared storage.
Which NetApp feature should be enabled to prevent these conflicts?
- A. SVMs
- B. broadcast domains
- C. failover groups
- D. IPspaces
Answer: D
NEW QUESTION 44
A customer wants to design a FlexPod configuration based on a CVD that was published 10 months ago. The customer wants to ensure that they are using the latest hardware and software versions.
In this scenario, which two tools are used to identify the latest supported hardware and software? (Choose two.)
- A. NetApp Interoperability Matrix Tool
- B. Cisco UCS Hardware and Software Interoperability Matrix
- C. Cisco UCS Director
- D. NetApp OnCommand System Manager
Answer: B,C
Explanation:
C: When using this matrix to determine recommended driver versions for you server configuration, please reference the server's Blade/Rack Bundle firmware version for the recommended driver in the event that your servers are running Mixed Firmware from your Infrastructure Bundle.
D: Cisco UCS Director delivers unified, highly secure management for supported compute, network, storage, and virtualization platforms and for the industry's leading converged infrastructure solutions
NEW QUESTION 45
Click the Exhibit button.
You are designing a FlexPod Datacenter solution for Microsoft Windows 2012 with Hyper-V. All hosts will boot from the SAN, including management hosts. The management hosts are Cisco C-Series servers.
Referring to the exhibit, which adapters are required to boot the management servers from the SAN?
- A. two 10GbE CNAs
- B. two 10GbE NICs
- C. two 1GbE NICs
- D. two 8Gb HBAs
Answer: B
NEW QUESTION 46
An administrator decides to connect storage directly to UCS Fabric Interconnect to support FCoE within a FlexPod configuration.
In this scenario, which port type should be defined on the Fabric Interconnect ports that are connected to the storage controller?
- A. server port
- B. uplink port
- C. appliance port
- D. monitor port
Answer: B
NEW QUESTION 47
You are designing a FlexPod solution with a 2-node storage system, multiple compute chassis, and ACI.
In this scenario, which two network switches are required? (Choose two.)
- A. core switch
- B. leaf switch
- C. cluster interconnect switch
- D. spine switch
Answer: B,D
NEW QUESTION 48
A customer wants to deploy a performance-sensitive workload while leveraging NetApp Snapshot technology and technologies such as NAS and SAN.
Which architecture satisfies these requirements?
- A. NetApp SolidFire
- B. NetApp AFF
- C. NetApp StorageGRID
- D. NetApp EF-Series
Answer: A
NEW QUESTION 49
Which Cisco Nexus series switch supports NX-OS standalone mode or Application Centric Infrastructure (ACI) fabric mode?
- A. Nexus 9000
- B. Nexus 5000
- C. Nexus 7000
- D. Nexus 3000
Answer: A
NEW QUESTION 50
A customer is designing a FlexPod solution with VMware 6.x in a SAN boot environment using FCoE. The customer has predetermined the WWPN values for the NetApp LIFs and the UCS vHBAs. The customer is now working on the design workflow for the SAN boot process.
In this scenario, which three FlexPod environment objects are required for SAN connectivity? (Choose three.)
- A. NetApp export policies
- B. UCS boot policies
- C. FC zones
- D. UCS IQN pools
- E. initiator groups
Answer: A,B,D
NEW QUESTION 51
What are characteristics of the Cisco UCS 5108 blade chassis?
- A. 4 RU, 8 half-width UCS B-series blades, 40 Gbps I/O bandwidth
- B. 4 RU, 6 half-width UCS B-Series blades, 160 Gbps I/O bandwidth
- C. 6 RU, 8 half-width UCS B-series blades, 160 Gbps I/O bandwidth
- D. 6 RU, 6 half-width UCS B-series blades, 80 Gbps I/O bandwidth
Answer: C
NEW QUESTION 52
A customer is configuring the UCS to handle a multitenant environment. The customer has created an organization within UCS for each tenant and would like to allow access to these organizations for only users that belong to that tenant.
In this scenario, which feature in UCS Manager should the customer use to accomplish this task?
- A. User Roles
- B. Locales
- C. Service Profile
- D. Trusted Platform Module
Answer: C
NEW QUESTION 53
Your customer wants assurances that all aspects of FlexPod are highly available.
Which statement is correct in this scenario?
- A. Cisco UCS Manager maintains a replica of configuration information.
- B. Cisco UCS Manager automatically copies its configuration data to a remote data store.
- C. Cisco UCS Manager contains multiple UCS domains.
- D. Cisco UCS Manager uses active-active architecture.
Answer: A
Explanation:
The management and data plane of Cisco UCS is designed for high availability and redundant access layer fabric interconnects. In addition, Cisco UCS supports existing high availability and disaster recovery solutions for the data center, such as data replication and application-level clustering technologies.
NEW QUESTION 54
Click the Exhibit button.
A customer wants to ensure that FlexPod Datacenter connections to the storage layer are highly available. Which two configurations shown in the exhibit satisfy the customer's requirements? (Choose two.)
- A. II.
- B. IV
- C. I.
- D. III.
Answer: B,D
NEW QUESTION 55
You are a data center architect at a service provider. You need to configure a new multi-tenant FlexPod service offering.
Which three UCS Manager features will you need to accomplish this task? (Choose three.)
- A. auto discovery
- B. role-based access control
- C. policies
- D. service profiles
- E. virtualization support
Answer: B,C,D
NEW QUESTION 56
A customer is designing a FlexPod Datacenter with Cisco UCS C-Series servers. They intend to manage the solution with Cisco UCS Manager. They want to cable the servers to the Cisco UCS Fabric Interconnects.
In this scenario, which three configurations are supported? (Choose three.)
- A. Multipath mode
- B. DualWire Management mode
- C. SingleConnect mode
- D. Cluster mode
- E. Direct Connect mode
Answer: B,C,E
Explanation:
Dual-wire Management (Shared LOM): Shared LAN on Motherboard (LOM) ports on the rack server are used exclusively for carrying management traffic. A separate cable connected to one of the ports on the PCIe card carries the data traffic. Using two separate cables for managing data traffic and management traffic is also referred to as dual-wire management.
SingleConnect (Sideband): Using Network Controller Sideband Interface (NC-SI), the Cisco VIC card connects one cable that can carry both data traffic and management traffic. This feature is referred to as SingleConnect.
Direct Connect Mode: Cisco UCS Manager supports an option to connect the Cisco UCS C-Series Rack- Mount Server directly to the FIs. This option enables Cisco UCS Manager to manage the Cisco UCS C- Series Rack-Mount Servers using a single cable for both management traffic and data traffic. The Cisco UCS VIC connects to the FI of the system. This connection uses a single connection from each VIC to each FI.
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm4-0/b_C-Series- Integration_UCSM4-0/b_C-Series-Integration_UCSM4-0_chapter_01.html
NEW QUESTION 57
A customer is evaluating management tools for a new FlexPod infrastructure. They desire a tool that can orchestrate the provisioning of UCS compute nodes, NetApp storage, and VMware networking.
Which tool satisfies the requirements of this customer's heterogeneous environment?
- A. NetApp OnCommand Insight
- B. UCS Central
- C. UCS Director
- D. NetApp OnCommand Unified Manager
Answer: C
NEW QUESTION 58
You are configuring a FlexPod system for NAS protocols. You want to ensure that there are multiple paths between the initiators and targets in the solution.
Which two steps will accomplish this task? (Choose two.)
- A. Disable LACP.
- B. Configure the VLANs in Cisco UCS Manager as Common/Global.
- C. Allow the VLANs over the vPC peer link.
- D. Configure the VSANs in the Cisco Nexus 5000 switches.
Answer: A,B
NEW QUESTION 59
Which port type would you configure when you connect a chassis to the Cisco Fabric Interconnects?
- A. FC storage ports
- B. server ports
- C. appliance ports
- D. Ethernet uplink ports
Answer: A
NEW QUESTION 60
......
Updated Verified NS0-173 Q&As - Pass Guarantee: https://www.prepawaypdf.com/NetworkAppliance/NS0-173-practice-exam-dumps.html