Practice H3CSE WLAN Certification GB0-341-ENU exam. Online Exam Practice Tests with detailed explanations! Pass GB0-341-ENU with confidence!
GB0-341-ENU - H3CSE-WLAN Practice Tests 2021 | PrepAwayPDF
NEW QUESTION 133
Which of the following descriptions of the characteristics of the C H3C integrated wireless network is correct? (Multiple choice)
- A. Wired and wireless integrated switches have built-in wireless controllers, the first in the industry to support unified management
- B. High-reliability millisecond-level business backup capabilities are industry-leading, the first in the industry
- C. Perfect IPV6 solution, the first in the industry to support IPV4, IPV6 dual-stack protocol provides rich IPV6 features
- D. scalability WX6100E series AC supports up to 2 cards, scalable management 1280 APs.
Answer: A,B,C,D
NEW QUESTION 134
In wireless network survey and design, when covering floors and areas with business needs, the received signal strength of more than 95% of the target coverage area should be greater than or equal to ______. The signal strength of the key coverage area should be greater than or equal to _______.
- A. -80dBm ； -75dBm
- B. -90dBm ； -85dBm
- C. -85dBm ； -80dBm
- D. -75dBm ； -70dBm
Answer: D
NEW QUESTION 135
4 WX3024 is internally divided into two control modules, namely the wireless control module and the switch module. The wireless control module and the switch module are connected through an internal interface. What is the internal interface of the wireless control module and what is the internal interface of the switch module?
- A. GigabitEhternet1/0/2 ； GigabitEhternet1/0/24
- B. GigabitEhternet1/0/1 ； GigabitEhternet1/0/29
- C. GigabitEhternet1/0/1 ； GigabitEhternet1/0/24
- D. GigabitEhternet1/0/2 ； GigabitEhternet1/0/29
Answer: B
NEW QUESTION 136
The original WLAN room dividing and combining system adopts the 802.11b standard, and the AP uses WLAN dry amplifier for power amplification. Will the current power transformation be carried out to upgrade 802.11b to 802.11g, can the original indoor distributed system be directly used for dry discharge?
- A. No
- B. Yes
Answer: A
NEW QUESTION 137
During the Layer 2 registration of the Fit AP, the AP is in the Idle state on the AC. What are the possible reasons? (Multiple choice)
- A. There is no DHCP server in the network
- B. The Fit AP is not powered on
- C. The AP software version carried by the AC does not match the AC software version
- D. The serial number or model information of the Fit AP template on the AC is incorrectly configured
- E. Fit AP and AC are not in the same VLAN
Answer: A,B,D,E
NEW QUESTION 138
When locating the problem of unsuccessful registration of FIT AP, you can analyze the relevant LWAPP information on the debugger on AC or FIT AP. What is the recommended debug command? (Multiple choice)
- A. <H3C> debugging wlan lwapp packet control send
- B. <H3C> debugging wlan lwapp data
- C. <H3C> debugging wlan lwapp packet control receive
- D. <H3C>debugging wlan lwapp event
- E. <H3C> debugging wlan lwapp error
Answer: A,C,D,E
NEW QUESTION 139
Which of the following descriptions of electromagnetic waves is correct? (Multiple choice)
- A. The 2.4Ghz and 5GHz frequency bands used by the 802.11b/a/g protocol are related to ultra-high and extremely high frequency bands in radio waves
- B. The properties of electromagnetic waves include energy, polarization, phase, etc.
- C. Electromagnetic wave is a form of motion of electromagnetic field, which is formed by the propagation of changing electromagnetic field in space and requires a propagation medium
- D. The relationship between electromagnetic wave wavelength and frequency is: c=λxf, where c is equal to the speed of light (3*10^8m/s).
Answer: A,B,D
NEW QUESTION 140
Before the WLAN outdoor feeder enters the indoor equipment room from the feeder port, what should be done in order to be waterproof? (Choose one or more)
- A. All of the above
- B. Make the drip bend
- C. Straight through
- D. Coil the redundant feeder outdoors
Answer: B
NEW QUESTION 141
Which is not correct about the air interface utilization?
- A. The AP line is not connected to the terminal, and the air interface utilization rate is 0
Answer: A
NEW QUESTION 142
The maximum negotiated connection rate for 802.11a is?
- A. 54Mbps
- B. 36Mbps
- C. 11Mbps
- D. 150Mbps
Answer: A
NEW QUESTION 143
In the wireless networking that uses the controller WX5002 and AP WA2110, if you need to perform 802.1X authentication for wireless users, which of the following command needs to be configured first?
- A. port-security authorization ignore
- B. port-security tx-key-type 11key
- C. port-security enable
- D. dot1x authentication-method pap
Answer: C
NEW QUESTION 144
Which of the following operations can be the easiest and most effective way to avoid interference in the AP working environment?
- A. Adjust AP working channel
- B. Adjust the VLAN attributes of the SSID
- C. Replace the AP antenna
- D. Restart the AP device
Answer: A
NEW QUESTION 145
In order to increase the universal type, the FIT AP version of wireless products will no longer be released separately, and they will all be included in the corresponding controller version package file.
- A. True
- B. False
Answer: A
NEW QUESTION 146
Versions have been downloaded between AP and AC. What are the possible reasons? (Multiple choice)
- A. There is not enough space on the AP to store the version
- B. There is no version of the AP on the AC
- C. AP hardware problem
- D. The version on the AC is inconsistent with the version on the AP
Answer: A,B,C,D
NEW QUESTION 147
What are the several important driving forces of WLAN market demand? (Multiple choice)
- A. Easy to manage
- B. Economical
- C. Degree of freedom
- D. Efficient
Answer: B,C,D
NEW QUESTION 148
......
The best GB0-341-ENU exam study material and preparation tool is here: https://www.prepawaypdf.com/H3C/GB0-341-ENU-practice-exam-dumps.html