Nov 28, 2025 Updated LEED-Green-Associate Dumps Questions For USGBC Exam
Best Value Available Preparation Guide for LEED-Green-Associate Exam
NEW QUESTION # 84
Use of which of the following can help reduce the heat gain and peak air temperatures?
- A. Low albedo paving materials
- B. Pervious paving materials
- C. High reflectance roofing materials
- D. A drip irrigation system
Answer: C
NEW QUESTION # 85
The project area defined by the perimeter of a building plan is referred to as the building's
- A. envelope
- B. footprint
- C. density
- D. shell
Answer: B
Explanation:
The footprint of a building is the area of ground that it covers, defined by its perimeter. It's essentially the shape that results when you trace around the outer walls of a building plan. This term is used in architecture and urban planning to describe the space that a building occupies on a site. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources
NEW QUESTION # 86
In the commercial LEED Rating System, which point range will achieve the Certified level of certification?
- A. 50-59 points
- B. 30-39 points
- C. 40-49 points
- D. 60-69 points
Answer: C
Explanation:
LEED certification is awarded based on the number of points a project earns across several categories of green building performance. The range of points required to achieve the Certified level of certification for the commercial LEED Rating System is 40-49, out of a possible 110 points. The other levels of LEED certification are: Silver (50-59 points), Gold (60-79 points), and Platinum (80 or more points)12. Reference: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide2
NEW QUESTION # 87
Acoustic Performance falls under which credit category?
- A. Sustainable Sites
- B. Materials and Resources
- C. Indoor Environmental Quality
- D. Energy and Atmosphere
Answer: C
Explanation:
Explanation
Acoustic Performance is a credit that aims to provide workspaces and classrooms that promote occupants' well-being, productivity, and communications through effective acoustic design1. This credit falls under the Indoor Environmental Quality category, which addresses the quality of the indoor environment as it relates to the health and comfort of building occupants2. The Indoor Environmental Quality category has different credits for different LEED rating systems, such as LEED BD+C, LEED ID+C, LEED O+M, and LEED ND3. Acoustic Performance is one of the credits that is available for some of these rating systems, such as LEED BD+C: Schools, LEED ID+C: Commercial Interiors, and LEED O+M: Existing Buildings4.
References: =
Acoustic performance | U.S. Green Building Council
Indoor Environmental Quality | U.S. Green Building Council
LEED Rating Systems Overview
LEED rating system
NEW QUESTION # 88
Which of the following is a strategy for preventing light pollution?
- A. Install shielded fixtures
- B. Install up-lighting
- C. Use dark paving materials to diminish light distribution
- D. Install high performance windows
Answer: A
Explanation:
A strategy for preventing light pollution is to install shielded fixtures. Light pollution is the excessive or inappropriate use of artificial lighting that can have adverse effects on human health, wildlife, ecosystems, and astronomy. Shielded fixtures are lighting devices that direct light downward and prevent light from escaping upward or sideways. Shielded fixtures can reduce light pollution by minimizing glare, sky glow, light trespass, and energy waste13. Reference: LEED v4 Green Associate Candidate Handbook1, International Dark-Sky Association's Lighting Basics3
NEW QUESTION # 89
The U.S. Green Building Council (USGBC) member logo may be displayed when
- A. a professional successfully passes the LEED AP exam
- B. a professional is a member of the local USGBC chapter
- C. the project team successfully completes and certifies a project with the LEED Rating System
- D. the organization is a member of USGBC
Answer: D
NEW QUESTION # 90
Which of the following negative impacts on the environment are a result of waste being transported/diverted to landfills?
- A. Solid waste produces methane and potent greenhouse gas
- B. Increased pre-consumer recycled content
- C. Waste is incinerated and used to generate energy
- D. Decreased post-consumer recycled content
Answer: C
Explanation:
Waste that is transported or diverted to landfills can have negative impacts on the environment, such as occupying valuable land, contaminating soil and water, and emitting harmful gases. One of the most significant impacts is the production of methane, a potent greenhouse gas that contributes to global warming and climate change. Methane is generated when organic waste decomposes anaerobically (without oxygen) in landfills. Methane has a global warming potential 28 times higher than carbon dioxide over a 100-year period12. Reference: LEED v4 Green Associate Candidate Handbook1, EPA's Landfill Methane Outreach Program2
NEW QUESTION # 91
Unless mitigated, resource consumption over the life of a conventional building
- A. incrementally increases the total emissions footprint
- B. fluctuates between increasing and decreasing the total emissions footprint
- C. remains steady
- D. gradually decreases the total emissions footprint
Answer: A
Explanation:
Unless mitigated, resource consumption over the life of a conventional building incrementally increases the total emissions footprint. This is because conventional buildings often use non-renewable resources for energy and materials, which contribute to greenhouse gas emissions during extraction, production, use, and disposal. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources
NEW QUESTION # 92
Light colored paving and cool roofs are terms referring to materials with
- A. lower emissivity and lower albedo
- B. higher emissivity and lower albedo
- C. lower emissivity and higher albedo
- D. higher emissivity and higher albedo
Answer: D
Explanation:
Explanation
Light-colored paving and cool roofs refer to materials with higher emissivity and higher albedo. Emissivity is the ability of a material to emit heat that it absorbs, while albedo is a measure of how much light that hits a surface is reflected without being absorbed. Materials with high emissivity can help reduce heat islands by releasing more of the heat they absorb, while those with high albedo can reflect more sunlight and thus stay cooler. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources
NEW QUESTION # 93
Which strategy promotes sustainable purchasing during construction?
- A. Implement an erosion and sedimentation plan
- B. Specify green electronic equipment
- C. Reduce regional materials expense by 10%
- D. Develop a construction purchasing policy
Answer: D
Explanation:
Developing a construction purchasing policy is a strategy that promotes sustainable purchasing during construction. A construction purchasing policy is a document that outlines the criteria and requirements for selecting materials, products, and services that have lower environmental impacts and support human health during construction. A construction purchasing policy can address issues such as recycled content, regional materials, certified wood, low-emitting materials, rapidly renewable materials, durability, life cycle assessment, waste reduction, and indoor air quality. The other options are not strategies that promote sustainable purchasing during construction. Specifying green electronic equipment is relevant for operations purchasing, not construction purchasing. Reducing regional materials expense by 10% does not necessarily imply sustainable purchasing, as regional materials may have higher or lower environmental impacts depending on their source and transportation methods. Implementing an erosion and sedimentation plan is a strategy that protects water quality during construction, but does not address sustainable purchasing. References: LEED Green Associate Candidate Handbook, page 24; USGBC, [Guide to LEED Certification: Commercial], page 12.
NEW QUESTION # 94
Which impact categories have been identified as most important for a LEED project to accomplish?
- A. Increase return on investment, promote human scale development
- B. Increase return on investment, promote sustainable and regenerative material cycles
- C. Protect biodiversity and ecosystem services, improve business efficiency
- D. Reduce contribution to climate change, enhance human health and well-being
Answer: D
NEW QUESTION # 95
Which of the following project characteristics demonstrate smart growth principles?
- A. The project consists of a sprawling new housing complex 5 mi. (8 km) from the nearest city
- B. The project is built on a former chemical landfill site
- C. The project consists of two adult care facilities, three senior center facilities and one nursing home
- D. The project protects open space and farmland by building housing and offering transportation choices near jobs, shops and schools
Answer: D
Explanation:
Smart growth principles aim to create livable, walkable, and sustainable communities that reduce sprawl, preserve natural resources, and enhance quality of life. One of the principles is to foster distinctive, attractive communities with a strong sense of place by mixing land uses, providing a range of housing opportunities and choices, creating walkable neighborhoods, and encouraging community and stakeholder collaboration in development decisions. The project that protects open space and farmland by building housing and offering transportation choices near jobs, shops and schools exemplifies this principle. Reference: LEED v4 Green Associate Candidate Handbook, Smart Growth Principles
NEW QUESTION # 96
Which of the following is a benefit of a building owner choosing to install a solar photovoltaic?
- A. Decreased upfront building cost
- B. Heat Island Reduction
- C. Reduced greenhouse gas emissions
- D. Lower liabilities
Answer: C
NEW QUESTION # 97
When considering strategies for reducing indoor water use, which plumbing fixture would be excluded?
- A. Showerhead
- B. Drip irrigation
- C. Urinal
- D. Kitchen faucet
Answer: B
Explanation:
Explanation
Drip irrigation is a method of watering plants that delivers water directly to the roots through a network of pipes, tubes, valves, and emitters. Drip irrigation is not a plumbing fixture, but a landscaping technique that can reduce outdoor water use by minimizing evaporation, runoff, and overspray12.
Plumbing fixtures are devices that provide water for various purposes, such as washing, bathing, cooking, or flushing. Plumbing fixtures include urinals, showerheads, kitchen faucets, and other types of faucets, toilets, bidets, and sinks. Plumbing fixtures are subject to indoor water use reduction strategies in LEED certification, such as installing low-flow or high-efficiency models, using automatic sensors or timers, or implementing water reuse systems34.
NEW QUESTION # 98
Unless mitigated, resource consumption over the l[1]ife of a conventional building ------------------------------------------------------------ [1]
- A. incrementally increases the total emissions footprint
- B. fluctuates between increasing and decreasing the total emissions footprint
- C. remains steady
- D. gradually decreases the total emissions footprint
Answer: A
Explanation:
Unless mitigated, resource consumption over the life of a conventional building incrementally increases the total emissions footprint. This is because conventional buildings often use non-renewable resources for energy and materials, which contribute to greenhouse gas emissions during extraction, production, use, and disposal. Reference: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources
NEW QUESTION # 99
......
Full LEED-Green-Associate Practice Test and 322 Unique Questions, Get it Now!: https://www.prepawaypdf.com/USGBC/LEED-Green-Associate-practice-exam-dumps.html
The Best LEED-Green-Associate Exam Study Material Premium Files and Preparation Tool: https://drive.google.com/open?id=1NOoBwOR6ubyIr5NojrkbaAFb1Gm_Qq9w