[2022] Verified HPE6-A72 Dumps Q&As - 1 Year Free & Quickly Updates
Latest 2022 Realistic Verified HPE6-A72 Dumps - 100% Free HPE6-A72 Exam Dumps
How to schedule Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam
To apply for the Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam, You have to follow these steps:
- Step 1: Go to the Aruba Certified Switching Associate (HP HPE6-A72) Professional Official Site. You must first create an account, use your email address to register. You must purchase your training through your local distributor. If you are a partner, you must first create an account on the Partner Portal. You must use your company email address to register.
- Step 2: Read the instruction Carefully
- Step 3: Follow the given steps
- Step 4: Apply for the Aruba Certified Switching Associate (HP HPE6-A72)-Professional Exam
For queries, contact your regional training team:
Get access to The Learning Center and get an HPE Learner ID. If this certification demands a written or online exam (HPE0 or HPE6 or HPE2), then generate a user profile with Pearson VUE, exam vendor for proctored/online exams. Practical exams are given through PSI or Aruba Education Services, consequently, no Pearson VUE user profile is needed.
Understanding functional and technical aspects of Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam Design for Spanning Tree Protocol
The following will be discussed in HP HPE6-A72 dumps:
- Inactive routes
- Explain how to manage and configure facilitiesinfrastructure (racks, PDUs, etc)
- Load balancing
- Administrative Distance
- Load Balancing
- OSPF Router-ID and Hello Messages
- Designated Router and Backup Designated Router
- Link State Database
- Interior Gateway Protocol vs Exterior Gateway Protocol
- Standard Gateway
- Utilizing cost to manage routes
- Routing of Inter-VLAN
- Explain how to manage firmware with HPE OneView
- Part 2 Packet Transmission
- Distance Vector vs Link State
- Latent interfaces
- Similar Spanning Tree
- Route preference and convergence
- VRRP
- Floating routes
- Classless inter-domain routing
- Scalability problems
- Describe Hewlett Packard Enterprise (HPE) OneView managed device support for HPE Synergy, HPE BladeSystem, and HPE ProLiant servers
- Adding and configuring devices under management in HPE OneView
- DHCP Internet Protocol Helper Address
- Link Aggregation Control Protocol
- 802.1w domain arrangement
- Coordination
- Preempt
- 802.1w summary
- Overview
- L2 loops
- Explain how to add, configure, and manage storage systemsin HPE OneView
- IP Routing - Section 2
- Fundamental operation
- Excessive network
- Intro to Variable refrigerant flow
- IP Routing Service
- Need for third layer redundancy.
- Describe the processto configure networksin HPE OneView
- Static Aggregate
NEW QUESTION 53
Which two options are correct regarding the IEEE 802.11ax standard? (Choose two.)
- A. operates in both the 2.4GHz and 5GHz radios bands
- B. operates only in the 5GHz similar to 802.11ac
- C. allows transmissions of up to 4.8Gbps
- D. is an emerging satellite connection standard to allow wireless access anywhere in the world
- E. is the first WLAN standard to no longer use electromagnetic signals to transmit data
Answer: A,C
Explanation:
Explanation/Reference:
NEW QUESTION 54
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
Answer: C
NEW QUESTION 55
Click on the colored box that corresponds with the line that best represents Unicast traffic flow.
Answer:
Explanation:
NEW QUESTION 56
Match each network protocol to the correct server listening port. Not all answers will be used.
Answer:
Explanation:
NEW QUESTION 57
Which two types of routes can be found in the IP routing table of an Aruba AOS-CX switch? (Choose two.)
- A. Local
- B. ISIS
- C. EIGRP
- D. RIPng
- E. BGP
Answer: A,E
NEW QUESTION 58
The section in blue can be ignored.
SW1(config)# interface 1/1/1-1/1/2
SW1(config-if-<1/1/1-1/1/2)# vlan access 2
SW1(config-if-<1/1/1-1/1/2)# exit
SW1(config)# interface 1/1/11-1/1/17
SW1(config-if-<1/1/11-1/1/17)# vlan access 17
SW1(config-if-<1/1/11-1/1/17)# exit
After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: A
NEW QUESTION 59
Refer to the exhibit.
What is the correct binary conversion of the last two hexadecimal characters of the physical address?
- A. 1110 1101
- B. 1101 1000
- C. 1000 1101 1110 1101
- D. 1001 1111 0101 0011
Answer: A
NEW QUESTION 60
Click on the colored box that corresponds with the line that best represents Unicast traffic flow.
Answer:
Explanation:
NEW QUESTION 61
Match the available stacking feature to the correct AOS-CX switch model. Stacking features may be used more than once.
Answer:
Explanation:
NEW QUESTION 62
Match each description to the correct management tool for Aruba AOS-CX.
Answer:
Explanation:
NEW QUESTION 63
What is true about VSX? (Choose two.)
- A. VSX run separate control planes to reduce latency and improve performance.
- B. VSX is ideal for Campus access layer deployments where ease of deployment is needed.
- C. VSX is implemented on static port switches. VSX-plus needed to stack chassis together.
- D. VSX is available on all Aruba OS-CX switches except the 6300F model.
- E. VSX allows upgrading members with near zero downtime or loss of packets.
Answer: A,E
NEW QUESTION 64
What connectivity commands are available on AOS-CX switches? (Choose two.)
- A. traceroute
- B. pathping
- C. tracert
- D. netstatus
- E. ping
Answer: A,E
NEW QUESTION 65
The customer has 778 developers testing computer games on the network.
Which two actions resolve Broadcast storms? (Choose two.)
- A. Utilize Spanning Tree to dynamically disable all redundant links in a segment.
- B. Utilize Spanning Tree to dynamically block Designated ports in addition to Alternate ports.
- C. Manually disable the redundant link to immediately resolve the impacted portion of the network.
- D. Setting switch ports to half-duplex will resolve Broadcast storms using Carrier Sense Multiple-Access Collision Detection (CSMA/CD).
- E. Enable single Area Open Shortest Path First (OSPF) on all Layer 2 switches, but do not enable routing.
Answer: A,C
NEW QUESTION 66
ServiceOS login: admin
SVOS> password
Enter password: ********
Confirm password: ********
The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above.
What is the default password that is required for the admin account while under the Service OS console?
- A. The same login password that has lost originally.
- B. No password is set for this account.
- C. "password"
- D. "forgetme!"
Answer: D
NEW QUESTION 67
Which command will suppress LLDP messages from egressing on a given port while still allowing LLDP to be enabled on the switch?
- A. switch(config)# no lldp
- B. switch(config-if)# no lldp receive
- C. switch(config-if)# no lldp interface (port) transmit
- D. switch(config-if)# no lldp transmit
Answer: D
NEW QUESTION 68
The section in blue can be ignored.
SW1(config)# interface 1/1/1-1/1/2
SW1(config-if-<1/1/1-1/1/2)# vlan access 2
SW1(config-if-<1/1/1-1/1/2)# exit
SW1(config)# interface 1/1/11-1/1/17
SW1(config-if-<1/1/11-1/1/17)# vlan access 17
SW1(config-if-<1/1/11-1/1/17)# exit
After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION 69
What command will save your configuration on an Aruba AOS-CX switch so that your changes automatically load on next reboot?
- A. copy running-config initial-checkpoint
- B. copy startup-config running-config
- C. copy running-config checkpoint startup-config
- D. copy running-config default
Answer: C
NEW QUESTION 70
Refer to the exhibit.
Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN.
Which configuration will correct the issue?
- A. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN
Host-B: assign the default-gateway address 10.1.20.181 - B. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN
Host-B: assign the default-gateway address 10.1.20.1 - C. Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREEN
Host-B: assign the default-gateway address 10.1.20.181 - D. Host-B: assign the default-gateway address 10.1.20.181
Answer: A
NEW QUESTION 71
What are two available options as part of a DHCP offer message? (Choose two.)
- A. DNS server IP
- B. Subnet Mask
- C. LLDP-MED
- D. SSID
- E. VLANID
Answer: A,B
NEW QUESTION 72
Refer to the exhibit.
Switch-1 is not the root bridge. The ports shown are all the connected pointtopoint interfaces. What Role (hidden by the blue rectangle) will be assigned to the Lag 1 interface?
- A. Designated
- B. Alternate
- C. Backup
- D. Root
Answer: D
NEW QUESTION 73
Which two statements accurately describe the features of NetEdit? (Choose two.)
- A. NetEdit can run on a mobile device using Android or Apple IOS.
- B. NetEdit can be used to configure and validate any third-party device that supports SSH and REST access.
- C. NetEdit includes trial licensing for up to 10 nodes.
- D. NetEdit supports viewing and editing multiple devices using a single deployment plan.
- E. NetEdit can perform configuration and compliance validation.
Answer: D,E
NEW QUESTION 74
Refer to the exhibit.
What VSF command produces the above output?
- A. show vsf topology
- B. show vsf link
- C. show vsf detail
- D. show vsf member
Answer: A
NEW QUESTION 75
Refer to the exhibit.
What command (output shown above) gives the optics serial number and part number information?
- A. show inventory
- B. show interface physical
- C. show interface optics
- D. show interface transceiver
Answer: D
NEW QUESTION 76
Match each description to the correct term.
Answer:
Explanation:
NEW QUESTION 77
......
HPE6-A72 Dumps PDF and Test Engine Exam Questions: https://www.prepawaypdf.com/HP/HPE6-A72-practice-exam-dumps.html
Get 2022 Updated Free HP HPE6-A72 Exam Questions & Answer: https://drive.google.com/open?id=1s-d-cwpjGMMzRVowtSEMw-pLvxHsWhHr