[2022] Valid C1000-018 test answers & IBM C1000-018 exam pdf
Verified C1000-018 dumps Q&As - Pass Guarantee or Full Refund
IBM C1000-018 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
NEW QUESTION 36
An analyst is noticing false positives from a single IP on a specific offense. How can the analyst tune the event rule to eliminate these false positives?
- A. Add the rule test "AND when IP address equals" to the bottom of the test list of the rule.
- B. Add the rule test "AND NOT when IP address equals" to the bottom of the test list of the rule,
- C. Add the rule test "AND NOT when the offense is indexed by one of the following IP addresses".
- D. Add the rule test "AND when IP address equals" to the top of the test list of the rule.
Answer: B
NEW QUESTION 37
How does an analyst view which rule triggered an Offense in the Offense summary page?
- A. Actions -> View Rules
- B. Display -> Triggered Rules
- C. Display -> Rules
- D. Actions -> Display Rules
Answer: C
NEW QUESTION 38
Which component in QRadar collects and creates flow information?
- A. Qflow
- B. NetFIow
- C. sflow
- D. J-Flow
Answer: A
Explanation:
Explanation
https://www.ibm.com/support/pages/qradar-about-flows-and-difference-between-qflow-collector-and-qradar-eve
NEW QUESTION 39
After working with an Offense, an analyst set the Offense as hidden. What does the analyst need to do to view the Offense at a later time?
- A. In the al Offenses view, select Actions, then select show hidden Offenses.
- B. Click Clear Filter next to the "Exclude Hidden Offenses".
- C. In the all Offenses view, at the top of the view, select ''Show hidden'' from the ''Select an option'' drop- down.
- D. Search for all Offenses owned by the analyst
Answer: B
Explanation:
Explanation
To clear the filter on the offense list, click Clear Filter next to the Exclude Hidden Offenses search parameter.
NEW QUESTION 40
While creating a new custom property, which is a valid property types selection?
- A. Event Based
- B. AQL Based
- C. Flow Based
- D. Regular Expressions Based
Answer: D
NEW QUESTION 41
An analyst needs to find events coming from unparsed log sources in the Log Activity tab.
What is the log source type of unparsed events?
- A. SIM Unknown
- B. SIM Unparsed
- C. SIM Generic
- D. SIM Error
Answer: C
Explanation:
Explanation
SIM Generic log source or by using the Event is Unparsed filter.
NEW QUESTION 42
Which filter would an analyst apply in the Log Activity tab to get a list of log sources not reporting to QRadar?
- A. Log source status does not equal active
- B. Custom rule equals device stopped sending events
- C. Log source type does not equal active
- D. Log source status does not equal error
Answer: A
NEW QUESTION 43
An analyst has been assigned a task to modify a rule in such a manner that Source IP of the triggered Offense from this rule should be stored in a Reference set.
Under which section of the rule wizard can the analyst achieve this?
- A. Rule Action
- B. Rule Response Limiter
- C. Rule Response
- D. Rule Test Stack Editor
Answer: D
NEW QUESTION 44
When looking at Common rules, the parameters available to the tests refer to attributes of events and flows.
Which attributes are available?
Common rule tests can operate on:
- A. all flow attributes, but no event attributes.
- B. a subset of the attributes of events and flows.
- C. all attributes of events and flows.
- D. all event attributes, but no flow attributes.
Answer: D
NEW QUESTION 45
An analyst needs to create a dashboard item that can be shared with other users. What is the main step in this process?
- A. Create and share the search criteria that the dashboard Item will use.
- B. Enable a new custom dashboard and share it with users.
- C. Have users index the shared search criteria for reuse.
- D. Ask the administrator to modify the shared search criteria and test the dashboard.
Answer: B
NEW QUESTION 46
An analyst observed a port scan attack on an internal network asset from a remote network.
Which filter would be useful to determine the compromised host?
- A. Destination IP [Indexed]
- B. Source IP [Indexed]
- C. Source or Destination IP
- D. Any IP
Answer: D
NEW QUESTION 47
Where can an analyst working with Offenses add a regular expression test into an existing rule?
- A. Left
- B. Bottom
- C. Top
- D. Right
Answer: C
NEW QUESTION 48
What are the different flow types in QRadar?
- A. Standard, Type 1, Type2, Type 3
- B. Standard, Type A, Type B, Type C
- C. L2L, L2R, R2R, R2L
- D. Type 1, Type 2, Type 3, Type 4
Answer: B
NEW QUESTION 49
An analyst for a particular offense needs to investigate to understand the breakdown of the offense details.
How can the analyst do this?
- A. Look at all the event QIDs attached to the offense.
- B. Look at the magnitude information and its breakdown.
- C. Look at the list of categories, event low level categories and the events attached.
- D. View the attack path of the offense.
Answer: C
NEW QUESTION 50
What is the purpose of Anomaly detection rules?
- A. They detect if QRadar is operating at peak performance and error free.
- B. They detect unusual traffic patterns in the network from the results of saved flow and events.
- C. They inspect other QRadar rules.
- D. They run past events and flows through the Custom Rules Engine (CRE) to identify threats or security incidents that already occurred.
Answer: B
NEW QUESTION 51
What steps are needed to add an Annotation to an event or flow that triggered a Rule?
- A. When creating a Rule, a custom Annotation can be automatically applied to events and flows that originate from specified Sources.
- B. Events and Flows cannot be Annotated, the only information allowed in an event or flow is data that was included in the original payload.
- C. When creating a Rule, a custom Annotation can be specified to automatically be applied to the event or flow that triggered the Rule.
- D. Annotations can be manually added to an Offense. These Annotations are then automatically applied to all events or flows which triggered the rule creating that Offense.
Answer: C
NEW QUESTION 52
An analyst is investigating access to sensitive data on a Linux system. Data is accessible from the /secret directory and can be viewed using the 'sudo oaf command. The specific file /secret/file_08-txt was known to be accessed in this way. After searching in the Log Activity Tab, the following results are shown.
When interpreting this, the analyst is having trouble locating events which show when the file was accessed.
Why could this be?
- A. The 'LinuxServer @ centos' log source has coalescing configured and the specific event for that file can only be accessed by clicking on the 'Event Count' value.
- B. The 'LinuxServer @ cantos' log source has boon configured as a Faise Positive and the specific event for that file has been dropped.
- C. The 'LinuxServer @ centos' log source has not been configured to send the relevant events to QRadar.
- D. The ;LinuxServer @ centos; log source has coalesscing conigured and the specific event for that file has been discardedd.
Answer: A
NEW QUESTION 53
An analyst needs to create a new custom dashboard to view dashboard items that meet a particular requirement.
What are the main steps in the process?
- A. Locate existing dashboard and modify to include indexed items required and save.
- B. Request the administrator to create the custom dashboard with required items.
- C. Select New Dashboard and enter unique name, description, add items and save.
- D. Select New Dashboard and copy name, add description, items and save.
Answer: B
Explanation:
Explanation
To create or edit your dashboards, log in as an administrator, click the Dashboards tab, and then click the gear icon. In edit mode, you can create new dashboards, add and remove widgets, edit display values in existing widgets, and reorder tabs.
NEW QUESTION 54
An analyst needs to investigate an Offense and navigates to the attached rule(s).
Where in the rule details would the analyst investigate the reason for why the rule was triggered?
- A. List of test conditions
- B. Rule actions
- C. Rules response limiter
- D. Rule responses
Answer: C
NEW QUESTION 55
Which considering the ability to tune False Positives with the Confidence factor Setting, which statement applies?
- A. Secure areas should have a lower confidence value, while less secure areas should have a higher confidence value.
- B. When setting a confidence factor, using a higher value will result in a higher number of Offenses.
- C. To ensure that the results are comparable, it is important to apply a common Confidence Factor across all network segments.
- D. Secure areas should have a higher confidence value, while less secure areas should have a lower confidence value a higher,,
Answer: D
NEW QUESTION 56
The SOC team complained that they have can only see one Offense in the Offenses tab.
space of 10 minutes, but the analyst How can the analyst ensure only one email is sent in this circumstance?
- A. Add a Response Limiter to the Rule, configured to execute only once every 30 minutes.
- B. Configure the postfix mail server on the Console to suppress duplicate items
- C. Ensure that the Rule Action Limiter is configured the same way as the Rule Response Limiter.
- D. Disable Automated Offense Notification - by email, in Advanced System Settings.
Answer: B
NEW QUESTION 57
What information is included in flow details but is not in event details?
- A. Log source information
- B. Number of bytes and packets transferred
- C. Magnitude information
- D. Network summary information
Answer: D
NEW QUESTION 58
An auditor has requested a report for all Offenses that have happened in the past month. This report generates at the end of every month but the auditor needs to have it for a meeting that is in the middle of the month.
What will happen to the scheduled report if the analyst manually generates this report?
- A. The report still generates on the schedule initially configured.
- B. The analyst needs to delete the scheduled report and create a new one.
- C. The report will get duplicated so the analyst can then run one manually.
- D. The scheduled report needs to be reconfigured.
Answer: B
Explanation:
Explanation
Shared schedules must be deleted manually using the Schedules page in the web portal or the Shared Schedules folder in Management Studio. If you delete a shared schedule that is in use, all references to it are replaced with report-specific schedules.
If you delete a shared schedule that is used by multiple reports and subscriptions, the report server will create individual schedules for each report and subscription that previously used the shared schedule. Each new individual schedule will contain the date, time, and recurrence pattern that was specified in the shared schedule. Note that Reporting Services does not provide central management of individual schedules. If you delete a shared schedule, you will now have to maintain the schedule information for each individual item.
NEW QUESTION 59
What does the Assets tab provide?
A unified view of the information that is known about:
- A. network devices.
- B. log sources.
- C. triggered Offenses.
- D. events and flows.
Answer: D
NEW QUESTION 60
......
C1000-018 Exam Questions – Valid C1000-018 Dumps Pdf: https://www.prepawaypdf.com/IBM/C1000-018-practice-exam-dumps.html